Installation guide

English FrançaisDeutsch Español
Accessory CD-ROM Installation Guide (PSR-2100/1100)
CD-ROM Installation Procedure
The following steps are the same for both Windows and Macintosh.
1
Verify that your system meets the operating requirements of
the software (File Utility, driver, etc.)
See the Minimum System Requirements.
2
Connect the PSR-2100/1100 to your computer.
Refer to the owner’s manual for details on connections.
Depending on the computer system you are using, some types of
connections may not be possible.
3
Install the appropriate driver (USB or MIDI) to your com-
puter, and make the necessary settings.
The arrow symbols shown below represent cables.
Connection using a USB cable
USB connector of the PSR-2100/1100
USB connector of the computer
See page 3 (Windows) or page 6 (Macintosh) in the
Acrobat Reader/File Utility/YAMAHA USB MIDI Driver
Installation Guide.
Connection using MIDI cables
MIDI connector of the PSR-2100/1100
MIDI interface device
Computer
See page 5 (Windows) or page 7 (Macintosh) in the
Acrobat Reader/File Utility/YAMAHA USB MIDI Driver
Installation Guide.
4
Install the software (File Utility, etc.).
Acrobat Reader/File Utility/YAMAHA USB MIDI Driver:
See the Acrobat Reader/File Utility/YAMAHA USB MIDI
Driver Installation Guide.
5
Start up the software.
For subsequent operations, refer to the owner’s manual for each
software program (online help/PDF manual).
In order to view PDF files, you will need to install Acrobat Reader in your
computer.
See page 3 (Windows) or page 6 (Macintosh) in the Acrobat Reader/File
Utility/YAMAHA USB MIDI Driver Installation Guide.
Minimum System Requirements
For Windows
For Macintosh
Data Name OS CPU Memory Hard Disk Display Other
File Utility
Windows 98/98SE/Me/
2000/XP Home Edition/XP
Professional
166 MHz or higher; Intel®
Pentium®/Celeron®
processor family
32 MB or more 6 MB or more
640
×
480
HighColor (16bit)
USB Driver for
Windows 98/Me
Windows 98/98SE/Me
166 MHz or higher; Intel®
Pentium®/Celeron®
processor family
32 MB or more 2 MB or more
USB Driver for
Windows 2000/XP
Windows 2000/XP Home
Edition/XP Professional
166 MHz or higher; Intel®
Pentium®/Celeron®
processor family
32 MB or more 2 MB or more
Data Name OS CPU Memory Hard Disk Display Other
File Utility
Mac OS 8.0 through OS
9.22 (Mac OS X is not
supported)
A Macintosh computer with
a USB connector and a
PowerPC or later CPU.
6 MB or more
4 MB or more
(except for OMS)
640
×
480, 256
colors or more
USB Driver
Mac OS 8.6 through OS
9.22 (Mac OS X is not
supported)
A Macintosh computer with
a USB connector and a
PowerPC or later CPU.
64 MB or more
(128 MB or more
is recommended)
2 MB or more
OMS 2.3.3 or
later (included in
the CD-ROM in
the package)