Owner`s manual

INSTRUMENT AND CONTROL FUNCTIONS
3-14
3
4. Remove the mudguard by remov-
ing each quick fastener.
5. To increase the spring preload
and thereby harden the suspen-
sion, turn the adjusting ring in di-
rection
a
. To decrease the spring
preload and thereby soften the
suspension, turn the adjusting ring
in direction
b
.
NOTE:
_
●
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
●
Use the special wrench included in
the owner’s tool kit to make the
adjustment.
_
CI-10E
6. Install the mudguard and ignitor
unit panel by installing the quick
fasteners.
1. Quick fastener (× 3)
2. Mudguard
1. Position indicator
2. Spring preload adjusting ring
3. Special wrench
Setting
Minimum (soft) 1
Standard 4
Maximum (hard) 9
U5KS10.book Page 14 Tuesday, November 5, 2002 11:05 AM