English Deutsch ELECTRONIC DRUM PAD Yamaha Electronic Drums web site: http://www.yamaha.co.jp/english/product/drums/ed/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2009 Yamaha Corporation WS70070 910PO***.
English PRECAUTIONS Please read carefully before proceeding. The purpose of the precautions detailed below is to ensure that this product is used safely without fear either of accidental injury to you or other people or of damage to property. As a means, furthermore, of indicating the severity and immediacy of any risk of injury or damage associated with incorrect operation, these precautions are classified as either WARNING or CAUTION.
Package Contents To customers who purchased a Pads Set, please refer to the attached “Assembly Manual” included with the Pads Set when confirming package contents.
Pad-to-Input Matching Chart The function of the XP series pads varies according to which trigger input jack on the Drum Trigger Module the pad is connected. The chart below describes its function in relation to trigger input jacks. DTX900 Trigger Input Jack 1-5 6-8, 12-15 9 10/11 Pad Rim – Pad Control Functions – – – : Compatible – : Not compatible • When using the XP series pad as a snare pad, set the pad type of the DTX900 to “XP120/100 (for snare).
Setting Up XP100SD/120SD Before set up, please prepare a snare stand e (Yamaha SS652, etc.), and set the XP100SD/120SD onto the stand as you would an acoustic snare drum. XP100T/100SD/120T After setting up your rack system (Yamaha RS series, etc.) or a standard tom stand (Yamaha WS series, etc.), attach the pad as shown in the illustration. Insert the tom holder (hexagonal bar) q on your rack or tom stand into the pad, and firmly tighten the clamp bolt w to secure.
Pad Control Functions The pad controller used with the drum trigger module is compatible with pad control functions. The pad controller lets you adjust a variety of parameters (snares setting and tightness, tuning, etc.) by rotating the pad controller knob q (Please refer to the Owner’s Manual that came with your drum trigger module for more information.) • Never hit the controller knob or apply excessive force to it, since this may result in damage or malfunction.
Troubleshooting No Sound, Volume is Low Is the pad connected to the correct input number of the DTX Series Drum Trigger Module using the supplied stereo phone cable? (See “Pad-to-Input Matching Chart” above.) When a pad is connected with a mono phone cable, the voices assigned to the rim sections are not produced. Increase the output level using the level adjustment knob on the pad. (See “Output Level Adjustment” above.
English Deutsch ELECTRONIC DRUM PAD Yamaha Electronic Drums web site: http://www.yamaha.co.jp/english/product/drums/ed/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2009 Yamaha Corporation WS70070 910PO***.