UCAB NS-SW210 Subwoofer Caisson de grave OWNER’S MANUAL MODE D’EMPLOI
IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings.
FCC INFORMATION (for US customers) We Want You Listening For A Lifetime 1 IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.
Thank you for selecting this YAMAHA product. CAUTION: Read this before operating your unit Please read the following operating precautions before use. YAMAHA will not be held responsible for any damage and/or injury caused by not following the cautions below. • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
• VOLTAGE SELECTOR (Asia and General models only) The voltage selector switch on the rear panel of this unit must be set to your local main voltage BEFORE plugging this unit into the AC main supply. Voltages are 110-120/220-240 V AC, 50/60 Hz. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. In this state, this unit is designed to consume a very small quantity of power.
FEATURES • This subwoofer employs Advanced Yamaha Active Servo Technology II, which Yamaha has developed for the production of higher quality, super-bass sound. (Refer to page 5 for details on Advanced Yamaha Active Servo Technology II.) This super-bass sound adds a more realistic, theater-in-the-home effect to your audio system. • This subwoofer can be easily added to your existing audio system by connecting to either the speaker terminals or the line output (pin jack) terminals of the amplifier.
PLACEMENT CONTROLS AND THEIR FUNCTIONS A Front Rear B Power indicator Lights up Green when the POWER switch is turned ON; turns off when the POWER switch is turned OFF. ( : subwoofer, : front speaker) The subwoofer will have a good effect on your audio system. Using the subwoofer, it is recommended to place it on the outside of either the right or the left front speaker. (See fig. A .) The placement shown in fig.
ADJUSTING THE SUBWOOFER BEFORE USE CONNECTIONS Caution: Unplug the subwoofer and other audio/video components before making connections. Connecting to line output (pin jack) terminals of the amplifier Before using the subwoofer, adjust the subwoofer to obtain the optimum volume balance between the subwoofer and the front speakers by following the procedure described below.
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY II In 1988, Yamaha brought to the marketplace speaker systems utilizing YST (Yamaha Active Servo Technology) to give powerful, high quality bass reproduction. This technique uses a direct connection between the amplifier and speaker, allowing accurate signal transmission and precise speaker control. Yamaha’s newly developed Advanced YST II adds many refinements to Yamaha Active Servo Technology, allowing better control of the forces driving the amplifier and speaker.
TROUBLESHOOTING Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions given below do not help, disconnect the power cord and contact an authorized YAMAHA dealer or service center. Problem Cause What to Do Power is not supplied even though the POWER switch is set to the ON position. The power plug is not securely connected. Connect it securely. No sound. The volume is set to minimum. Raise the volume up.
SPECIFICATIONS Type ......Advanced Yamaha Active Servo Technology II Power Consumption ............................................... 40 W Driver.......................................16 cm (6.5”) cone woofer Magnetic shielding type Dimensions (W × H × D) .......................................166mm × 450 mm × 366 mm (6-9/16” × 17-3/4” × 14-7/16”) Amplifier Output (100 Hz, 5 ohms, 10% THD) .................................................................................. 50 W Frequency Response........
©2008 Yamaha Corporation All rights reserved.