User Manual

System Menu
105
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
This lets you load the backup file (clp-***.bup) saved
via the Backup function (page 104) to the instrument
on.
NOTICE
• It may take 1 – 2 minutes to complete this operation. Never turn
off the power during this operation (while “Executing” is shown).
Doing so could result in damage to the data.
• If recorded Songs reside on “User” memory, make sure to move
the Songs to the USB flash drive by following the instructions
page 68 before executing this operation. If you do not, the Songs
will be deleted via this operation.
1. Connect the USB flash drive containing the
Backup file to the USB [TO DEVICE]
terminal.
2. Press the [FUNCTION] button several times
to select the “System” menu (page 86).
3. Use the [u]/[d] buttons to select “Backup,”
use the [>] button to call up the next display,
then use the [
u]/[d] buttons to select
“Restore.”
4. Use the [>] button to call up the next display,
then use the [
u]/[d] button select “Execute.”
5. Press the [>] button to execute the Restore
operation.
A message indicating that the operation is
completed appears, then the instrument will restart
after a while.
This lets you reset this instrument to its factory
default settings which refers to the initial setting
preprogrammed when shipped from the factory, and
is called up when you first turn on the power to this
instrument.
Note that the following points.
• This operation resets the Backup Setting (page 104) to the
default setting.
• This operation will not delete the Songs saved in the User
folder.
• This operation will not delete the Bluetooth* pairing
information (page 78).
*For information on whether Bluetooth functionality is included
with the instrument or not, refer to page 142.
NOTICE
Never turn off the power during this operation (while “Factory reset
executing” is shown). Doing so could result in damage to the data.
1. Press the [FUNCTION] button several times
to select the “System” menu (page 86).
2. Use the [u]/[d] buttons to select “Backup,”
use the [>] button to call up the next display,
then use the [
u]/[d] buttons to select
“Factory Reset.”
3. Use the [>] button to call up the next display,
then use the [
u]/[d] buttons to select
“Execute.”
4. Press the [>] button to execute the Restore
operation.
A message indicating that the operation is
completed appears, then the instrument will restart
after a while.
 Alternate method for restoring the default
settings
Press and hold down the white key on the right end
(C7) and press the [P] (Standby/On) switch to turn
on the power to this instrument. This operation will
not delete the Songs in the User folder.
 Restore
(Restarting the instrument with the Backup file
loaded)
 Factory Reset
(Restarting the instrument with the initial
factory settings loaded)
[P] Standby/On switch
C7