Owner's Manual

SPECIFICATIONS
8-2
8
Quantity
Without oil filter element
replacement 3.0 L (2.64 Imp qt, 3.17 US qt)
With oil filter element
replacement 3.1 L (2.73 Imp qt, 3.28 US qt)
Total amount (dry engine) 3.6 L (3.17 Imp qt, 3.81 US qt)
Final gear oil
Type Hypoid gear oil SAE 80 (API
GL4) or multi-grade hypoid gear
oil SAE 80W-90
Quantity 0.2 L (0.18 Imp qt, 0.21 US qt)
Air filter Dry type element
Fuel
Type UNLEADED GASOLINE ONLY
Fuel tank capacity 17 L (3.74 Imp gal, 4.49 US gal)
Fuel reserve amount 4.5 L (0.99 Imp gal, 1.19 US gal)
Carburetor
Manufacturer MIKUNI
Model × quantity BSR37 × 2
CAUTION:
Be sure to use motor oils that do not contain anti-friction
modifiers. Passenger car motor oils (often labeled
“ENERGY CONSERVING II”) contain anti-friction additives
which will cause clutch and/or starter clutch slippage, result-
ing in reduced component life and poor engine performance.
Spark plug
Manufacturer/model NGK / BPR7ES or
DENSO / W22EPR-U
Gap 0.7–0.8 mm (0.028–0.031 in)
Clutch type Wet, multiple-disc
Transmission
Primary reduction system Spur gear
Primary reduction ratio 1.660
Secondary reduction system Shaft drive
Secondary reduction ratio 2.875
Transmission type Constant-mesh 5-speed
Operation Left foot
Gear ratio
1st 2.353
2nd 1.667
3rd 1.286
4th 1.032
5th 0.853
Chassis
Frame type Double cradle
Caster angle 33°
Tr a i l
XVS1100 136 mm (5.35 in)
XVS1100A 132 mm (5.19 in)
U5PB11.book Page 2 Thursday, June 14, 2001 8:59 AM