Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
EAU14200
Seats
(XVS1100A/XVS1100AT)
Passenger seat
To remove the passenger seat
Remove the bolt, and then pull the pas-
senger seat up.
To install the passenger seat
Insert the projection on the front of the
passenger seat into the holder as
shown, place the seat in the original po-
sition, and then install the bolt.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolt, and then pull the
rider seat up.
To install the rider seat
1. Insert the projections on the front
of the rider seat into the holders as
shown, place the seat in the origi-
nal position, and then install the
bolt.
2. Install the passenger seat.
NOTE:
Make sure that the seats are properly
secured before riding.
1. Bolt
1. Projection
2. Seat holder
1. Bolt
1. Projection
2. Seat holder
5YS10.book Page 11 Wednesday, May 14, 2003 6:32 PM