Operator`s manual

Maintenance and care
60
Turn the handlebars as far as possible to the
right and left and check that the difference of
distances A and B between the jet thrust noz-
zle and the nozzle is within specification.
If the steering is stiff or misadjusted, have a
Yamaha dealer service it.
EJU34331
Adjusting the steering friction
The amount of friction in the steering can be
adjusted to suit operator preference.
To adjust the steering friction:
(1) Lift the steering pole and support it with
the lock pin.
(2) Remove the four screws, and then re-
move the handlebar cover.
(3) Turn the handlebars so that the left han-
dlebar grip is facing down.
Difference of A and B:
Maximum 5 mm (0.20 in)
1 Steering pole
2 Lock pin
1 Adjusting nut
2 Locknut
UF2F10E0.book Page 60 Tuesday, July 31, 2007 1:45 PM