OWNER’S MANUAL XVS11X(C) XVS11AWX(C) XVS11ATX(C) LIT-11626-21-28 3B8-28199-12
U3B812E0.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM INTRODUCTION EAU10080 Congratulations on your purchase of the Yamaha XVS11X(C)/XVS11AWX(C)/XVS11ATX(C). This model is the result of Yamaha’s vast experience in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM IMPORTANT MANUAL INFORMATION EAU10131 Particularly important information is distinguished in this manual by the following notations: The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! WARNING Failure to follow WARNING instructions could result in severe injury or death to the motorcycle operator, a bystander or a person inspecting or repairing the motorcycle.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM IMPORTANT MANUAL INFORMATION AND UNTIL YOU HAVE BEEN TRAINED IN SAFE AND PROPER RIDING TECHNIQUES. REGULAR INSPECTIONS AND CAREFUL MAINTENANCE, ALONG WITH GOOD RIDING SKILLS, WILL ENSURE THAT YOU SAFELY ENJOY THE CAPABILITIES AND THE RELIABILITY OF THIS MOTORCYCLE. *Product and specifications are subject to change without notice.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM IMPORTANT MANUAL INFORMATION EAU10192 AFFIX DEALER LABEL HERE XVS11X(C)/XVS11AWX(C)/XVS11ATX(C) OWNER’S MANUAL ©2007 by Yamaha Motor Corporation, U.S.A. 1st edition, May 2007 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Japan.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM TABLE OF CONTENTS SAFETY INFORMATION ..................1-1 Location of important labels ...........1-5 DESCRIPTION ..................................2-1 Left view ..........................................2-1 Right view ........................................2-3 Controls and instruments ................2-5 INSTRUMENT AND CONTROL FUNCTIONS .......................................3-1 Main switch/steering lock ................
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM TABLE OF CONTENTS Checking and lubricating the sidestand ...................................6-27 Lubricating the swingarm pivots ...6-28 Lubricating the rear suspension ...6-28 Checking the front fork .................6-28 Checking the steering ...................6-29 Checking the wheel bearings .......6-30 Battery ..........................................6-30 Replacing the fuses ......................6-31 Replacing the headlight bulb ........
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM SAFETY INFORMATION EAU10251 MOTORCYCLES ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE DEPENDENT UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPERTISE OF THE OPERATOR. EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIREMENTS BEFORE RIDING THIS MOTORCYCLE. HE OR SHE SHOULD: ● OBTAIN THOROUGH INSTRUCTIONS FROM A COMPETENT SOURCE ON ALL ASPECTS OF MOTORCYCLE OPERATION.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM SAFETY INFORMATION 1 ● ● wide on a turn due to EXCESSIVE SPEED or undercornering (insufficient lean angle for the speed). • Always obey the speed limit and never travel faster than warranted by road and traffic conditions. • Always signal before turning or changing lanes. Make sure that other motorists can see you. The posture of the operator and passenger is important for proper control.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM SAFETY INFORMATION Loading The total weight of the operator, passenger, accessories and cargo must not exceed the maximum load limit. Maximum load: XVS11ATX 203 kg (448 lb) XVS11ATXC 200 kg (441 lb) XVS11AWX 203 kg (448 lb) XVS11AWXC 200 kg (441 lb) XVS11X 200 kg (441 lb) XVS11XC 197 kg (434 lb) When loading within this weight limit, keep the following in mind: ● Cargo and accessory weight should be kept as low and close to the motorcycle as possible.
U3B812E0.book Page 4 Tuesday, May 15, 2007 2:52 PM SAFETY INFORMATION 1 ● tor and may limit control ability, therefore, such accessories are not recommended. Use caution when adding electrical accessories. If electrical accessories exceed the capacity of the motorcycle’s electrical system, an electric failure could result, which could cause a dangerous loss of lights or engine power. Gasoline and exhaust gas ● GASOLINE IS HIGHLY FLAMMABLE: • Always turn the engine off when refueling.
U3B812E0.book Page 5 Tuesday, May 15, 2007 2:52 PM SAFETY INFORMATION EAU10381 Location of important labels Please read the following important labels carefully before operating this vehicle.
U3B812E0.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM DESCRIPTION EAU32220 Left view XVS11X 2 1. 2. 3. 4. 5. 6. 7. 8. Storage compartment (page 3-13) 9. Owner’s tool kit (page 6-1) 10.Fuse box (page 6-31) 11.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM DESCRIPTION XVS11AWX/XVS11ATX 2 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.Fuse box (page 6-31) 11.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM DESCRIPTION EAU32230 Right view XVS11X 2 1. 2. 3. 4. 5. 6. 7. 8. Rear brake light switch (page 6-23) 9.
U3B812E0.book Page 4 Tuesday, May 15, 2007 2:52 PM DESCRIPTION XVS11AWX/XVS11ATX 2 1. 2. 3. 4. 5. 6. 7. 8. 9.
U3B812E0.book Page 5 Tuesday, May 15, 2007 2:52 PM DESCRIPTION EAU10430 Controls and instruments 2 1. 2. 3. 4. 5. 6. 7. 8.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU10460 Main switch/steering lock EAU10680 LOCK The steering is locked, and all electrical systems are off. The key can be removed. To unlock the steering To lock the steering 3 1. Push. 2. Turn. The main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering. The various positions are described below.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU11003 Indicator and warning lights EAU11080 EAU11500 High beam indicator light “ ” This indicator light comes on when the high beam of the headlight is switched on. Engine trouble warning light “ ” This warning light comes on or flashes when an electrical circuit monitoring the engine is defective. When this occurs, have a Yamaha dealer check the selfdiagnosis system.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU11731 Speedometer unit tance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. EAU12347 Handlebar switches Left 3 1. “TRIP” button 2. Odometer/tripmeter The speedometer unit is equipped with a digital odometer and a tripmeter. The speedometer shows riding speed. The odometer shows the total distance traveled.
U3B812E0.book Page 4 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU12400 Dimmer switch “ / ” Set this switch to “ ” for the high beam and to “ ” for the low beam. EAU12500 Horn switch “ ” Press this switch to sound the horn. EAU12820 Clutch lever EAU12660 EAU12430 Turn signal switch “ / ” To signal a right-hand turn, push this switch to “ ”. To signal a left-hand turn, push this switch to “ ”. When released, the switch returns to the center position.
U3B812E0.book Page 5 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU12870 Shift pedal (XVS11X) EAU12880 Shift pedal (XVS11AWX/XVS11ATX) EAU12890 Brake lever 3 1. Shift pedal The shift pedal is located on the left side of the engine and is used in combination with the clutch lever when shifting the gears of the 5-speed constant-mesh transmission equipped on this motorcycle. 1. Brake lever 1.
U3B812E0.book Page 6 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU12941 Brake pedal EAU13120 Fuel tank cap XVS11X 2. Turn the key counterclockwise to the original position, remove it, and then close the lock cover. NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. EWA10130 WARNING 1. Brake pedal XVS11AWX/XVS11ATX 1. 2. 3. 4. Fuel tank cap lock cover “ ” mark Unlock.
U3B812E0.book Page 7 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU13211 Fuel ECA10070 CAUTION: Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts. EAU13300 3 1. Fuel tank filler tube 2. Fuel level Make sure that there is sufficient fuel in the tank. Fill the fuel tank to the bottom of the filler tube as shown.
U3B812E0.book Page 8 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU13441 EAU13550 Catalytic converter Fuel cock This vehicle is equipped with catalytic converters in the exhaust system. The fuel cock supplies fuel from the tank to the carburetors while also filtering it. The fuel cock lever positions are explained as follows and shown in the illustrations. EWA10860 WARNING The exhaust system is hot after operation.
U3B812E0.book Page 9 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS This indicates reserve. With the fuel cock lever in this position, the fuel reserve is made available. Turn the fuel cock lever to this position if you run out of fuel while riding.
U3B812E0.book Page 10 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS 2. Install the passenger seat holder and bolts. 3. Install the passenger seat. Tightening torque: Passenger seat nut: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) NOTE: Make sure that the seats are properly secured before riding. 3 1. Bolt 2. Passenger seat holder 1. Projection 2. Seat holder Rider seat To install the rider seat 1.
U3B812E0.book Page 11 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU14201 Seats (XVS11AWX/XVS11ATX) Tightening torque: Passenger seat nut: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) Passenger seat 3 To remove the passenger seat Remove the nut and washer, and then pull the passenger seat up. 1. Bolt To install the rider seat 1. Insert the projections on the front of the rider seat into the holders as shown, place the seat in the original position, and then install the bolt. 1. Projection 2.
U3B812E0.book Page 12 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS 2. Install the passenger seat. NOTE: Make sure that the seats are properly secured before riding. EAU14281 Helmet holder XVS11X To open the helmet holder, insert the key into the lock, and then turn the key as shown. To lock the helmet holder, place it in the original position, and then remove the key.
U3B812E0.book Page 13 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU14481 Storage compartment The storage compartment is located on the left side of the vehicle. 3 To open the storage compartment 1. Slide the lock cover open, insert the key into the lock, and then turn it clockwise. 1. Storage compartment lock 2. Pull the storage compartment cover out as shown. 1. Storage compartment cover 2. Storage compartment lock cover 1.
U3B812E0.book Page 14 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS EAU14871 Adjusting the shock absorber assembly 3. Pull the ignitor unit panel out to the right. XVS11AWX/XVS11ATX 1 The shock absorber assembly is located under the rider seat and is equipped with a spring preload adjusting ring. ECA10100 CAUTION: 3 Never attempt to turn an adjusting mechanism beyond the maximum or minimum settings. Adjust the spring preload as follows. 1. Remove the rider seat. (See page 3-9.) 2.
U3B812E0.book Page 15 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS XVS11X 3 1. Spring preload adjusting ring 2. Position indicator 3. Special wrench XVS11AWX/XVS11ATX Spring preload setting: Minimum (soft): 1 Standard: XVS11X 3 XVS11AWX 4 XVS11ATX 4 Maximum (hard): XVS11X 7 XVS11AWX 9 XVS11ATX 9 6. Install the mudguard and ignitor unit panel by installing the quick fasteners.
U3B812E0.book Page 16 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS ● ● ● Do not subject the shock absorber to an open flame or other high heat sources, otherwise it may explode due to excessive gas pressure. Do not deform or damage the gas cylinder in any way, as this will result in poor damping performance. Always have a Yamaha dealer service the shock absorber. EAU15150 Luggage strap holders EAU15301 Sidestand The sidestand is located on the left side of the frame.
U3B812E0.book Page 17 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS below and have a Yamaha dealer repair it if it does not function properly. 3 EAU15312 Ignition circuit cut-off system The ignition circuit cut-off system (comprising the sidestand switch, clutch switch and neutral switch) has the following functions. ● It prevents starting when the transmission is in gear and the sidestand is up, but the clutch lever is not pulled.
U3B812E0.book Page 18 Tuesday, May 15, 2007 2:52 PM INSTRUMENT AND CONTROL FUNCTIONS With the engine turned off: 1. Move the sidestand down. 2. Make sure that the engine stop switch is turned on. 3. Turn the key on. 4. Shift the transmission into the neutral position. 5. Push the start switch. Does the engine start? YES NOTE: This check is most reliable if performed with a warmed-up engine. NO The neutral switch may be defective. The motorcycle should not be ridden until checked by a Yamaha dealer.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM PRE-OPERATION CHECKS EAU15593 The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM PRE-OPERATION CHECKS EAU15605 Pre-operation check list ITEM CHECKS PAGE Fuel • Check fuel level in fuel tank. • Refuel if necessary. • Check fuel line for leakage. 3-7 Engine oil • Check oil level in engine. • If necessary, add recommended oil to specified level. • Check vehicle for oil leakage. 6-10 Final gear oil • Check vehicle for oil leakage. 6-12 Front brake • • • • • • • • • Check operation.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM PRE-OPERATION CHECKS ITEM CHECKS PAGE Throttle grip • Make sure that operation is smooth. • Check cable free play. • If necessary, have Yamaha dealer adjust cable free play and lubricate cable and grip housing. 6-15, 6-26 Control cables • Make sure that operation is smooth. • Lubricate if necessary. Wheels and tires • • • • Brake and shift pedals • Make sure that operation is smooth. • Lubricate pedal pivoting points if necessary.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM OPERATION AND IMPORTANT RIDING POINTS EAU15950 EWA10270 WARNING ● ● ● Become thoroughly familiar with all operating controls and their functions before riding. Consult a Yamaha dealer regarding any control or function that you do not thoroughly understand. Never start the engine or operate it in a closed area for any length of time. Exhaust fumes are poisonous, and inhaling them can cause loss of consciousness and death within a short time.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM OPERATION AND IMPORTANT RIDING POINTS 5 ● diately stop the engine, and then check the engine oil level and the vehicle for oil leakage. If necessary, add engine oil, and then check the warning light again. If the warning light does not come on when turning the key to “ON”, or if it does not go off after starting the engine with sufficient engine oil, have a Yamaha dealer check the electrical circuit.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM OPERATION AND IMPORTANT RIDING POINTS EAU16671 Shifting XVS11X Shifting gears lets you control the amount of engine power available for starting off, accelerating, climbing hills, etc. The gear positions are shown in the illustration. NOTE: To shift the transmission into the neutral position, press the shift pedal down repeatedly until it reaches the end of its travel, and then slightly raise it. 1. Shift pedal 2. Neutral position XVS11AWX/XVS11ATX 1.
U3B812E0.book Page 4 Tuesday, May 15, 2007 2:52 PM OPERATION AND IMPORTANT RIDING POINTS EAU16841 NOTE: Always shift gears at the recommended shift points. EAU16700 5 To decelerate 1. Apply both the front and the rear brakes to slow the motorcycle. 2. Shift the transmission into first gear when the motorcycle reaches 25 km/h (15.5 mi/h). If the engine is about to stall or runs very roughly, pull the clutch lever in and use the brakes to stop the motorcycle. 3.
U3B812E0.book Page 5 Tuesday, May 15, 2007 2:52 PM OPERATION AND IMPORTANT RIDING POINTS ECA10331 EAU17180 CAUTION: Parking After 1000 km (600 mi) of operation, the engine oil and final gear oil must be changed, and the oil filter cartridge or element replaced. When parking, stop the engine, remove the key from the main switch, and then turn the fuel cock lever to “OFF”. 1600 km (1000 mi) and beyond The vehicle can now be operated normally.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU17231 EAU17301 PERIODIC MAINTENANCE Safety is an obligation of the owner. Periodic inspection, adjustment and lubrication will keep your vehicle in the safest and most efficient condition possible. The most important points of motorcycle inspection, adjustment, and lubrication are explained on the following pages.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EWA10340 WARNING Modifications not approved by Yamaha may cause loss of performance, excessive emissions, and render the vehicle unsafe for use. Consult a Yamaha dealer before attempting any changes.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU17600 Periodic maintenance chart for the emission control system INITIAL No. 6 ITEM ROUTINE 1 * Fuel line • Check fuel hoses for cracks or damage. • Replace if necessary. 2 * Fuel filter • Replace. 3 Spark plugs • Check condition. • Adjust gap and clean. • Replace every 8000 mi (13000 km) or 12 months. 4 * Valve clearance • Check and adjust valve clearance when engine is cold.
U3B812E0.book Page 4 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU32185 General maintenance and lubrication chart INITIAL No. ITEM ROUTINE 600 mi (1000 km) or 1 month ODOMETER READINGS 4000 mi (7000 km) or 6 months 8000 mi 12000 mi 16000 mi 20000 mi (13000 km) (19000 km) (25000 km) (31000 km) or or or or 12 months 18 months 24 months 30 months 1 * Air filter element • Clean with compressed air. • Replace if necessary. 2 * Clutch • Check operation.
U3B812E0.book Page 5 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL No. ITEM ROUTINE 9 * Wheel bearings • Check bearings for smooth operation. • Replace if necessary. 10 * Swingarm pivot bearings • Check bearing assemblies for looseness. • Moderately repack with lithiumsoap-based grease. 11 * Steering bearings • Check bearing assemblies for looseness. • Moderately repack with lithiumsoap-based grease every 16000 mi (25000 km) or 24 months.
U3B812E0.book Page 6 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL No. ITEM ROUTINE ODOMETER READINGS 600 mi (1000 km) or 1 month 4000 mi (7000 km) or 6 months √ √ √ √ √ √ 8000 mi 12000 mi 16000 mi 20000 mi (13000 km) (19000 km) (25000 km) (31000 km) or or or or 12 months 18 months 24 months 30 months 18 * Sidestand switch • Check operation and replace if necessary. 19 * Front fork • Check operation and for oil leakage. • Replace if necessary.
U3B812E0.book Page 7 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL No. ITEM ROUTINE 27 * Throttle grip housing and cable • Check operation and free play. • Adjust the throttle cable free play if necessary. • Lubricate the throttle grip housing and cable. 28 * Lights, signals and switches • Check operation. • Adjust headlight beam.
U3B812E0.book Page 8 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU18751 EAU19552 Removing and installing the panel Checking the spark plugs The spark plugs are important engine components, which are easy to check. Since heat and deposits will cause any spark plug to slowly erode, the spark plugs should be removed and checked in accordance with the periodic maintenance and lubrication chart. In addition, the condition of the spark plugs can reveal the condition of the engine.
U3B812E0.book Page 9 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR 3. Remove the spark plug as shown, with the spark plug wrench included in the owner’s tool kit. diagnose such problems yourself. Instead, have a Yamaha dealer check the vehicle. 3. Check each spark plug for electrode erosion and excessive carbon or other deposits, and replace it if necessary. Specified spark plug: NGK/BPR7ES DENSO/W22EPR-U 1. Spark plug wrench 6 To check the spark plugs 1.
U3B812E0.book Page 10 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU19672 Canister (for California only) EAU19822 Engine oil The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter element replaced at the intervals specified in the periodic maintenance and lubrication chart. This model is equipped with a canister to prevent the discharging of fuel vapor into the atmosphere. ● Check each hose connection.
U3B812E0.book Page 11 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR 3. Remove the engine oil filler cap and drain bolt to drain the oil from the crankcase. NOTE: Check the washer for damage and replace it if necessary. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 5. Add the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. 1. Engine oil filler cap 6 Recommended engine oil: See page 8-1.
U3B812E0.book Page 12 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU20022 Final gear oil The final gear case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the vehicle. In addition, the final gear oil level must be checked and the oil changed as follows at the intervals specified in the periodic maintenance and lubrication chart. 2. Remove the oil filler bolt, and then check the oil level in the final gear case.
U3B812E0.book Page 13 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR 6. Check the final gear case for oil leakage. If oil is leaking, check for the cause. EAU20670 Cleaning the air filter element The air filter element should be cleaned as follows at the intervals specified in the periodic maintenance and lubrication chart. Clean the air filter element more frequently if you are riding in unusually wet or dusty areas. 1. Remove the air filter case cover by removing the screws. 4.
U3B812E0.book Page 14 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR ECA10480 CAUTION: ● ● Make sure that the air filter element is properly seated in the air filter case. The engine should never be operated without the air filter element installed, otherwise the piston(s) and/or cylinder(s) may become excessively worn. EAU21271 Carburetors The carburetors are important parts of the engine and emission control system, which require very sophisticated adjustment.
U3B812E0.book Page 15 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU21382 Checking the throttle cable free play EAU21401 EAU32520 Valve clearance Tires (XVS11X) The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart.
U3B812E0.book Page 16 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR Tire air pressure (measured on cold tires): 0–90 kg (0–198 lb): Front: XVS11X 200 kPa (29 psi) (2.00 kgf/cm²) XVS11XC 200 kPa (29 psi) (2.00 kgf/cm²) Rear: XVS11X 225 kPa (33 psi) (2.25 kgf/cm²) XVS11XC 225 kPa (33 psi) (2.25 kgf/cm²) XVS11X 90–200 kg (198–441 lb) XVS11XC 90–197 kg (198–434 lb): Front: 225 kPa (33 psi) (2.25 kgf/cm²) Rear: 250 kPa (36 psi) (2.
U3B812E0.book Page 17 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EWA10560 EWA10460 WARNING ● ● ● 6 It is dangerous to ride with a worn-out tire. When a tire tread begins to show crosswise lines, have a Yamaha dealer replace the tire immediately. The replacement of all wheeland brake-related parts, including the tires, should be left to a Yamaha dealer, who has the necessary professional knowledge and experience. It is not recommended to patch a punctured tube.
U3B812E0.book Page 18 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU32541 Tires (XVS11AWX/XVS11ATX) To maximize the performance, durability, and safe operation of your motorcycle, note the following points regarding the specified tires. Tire air pressure The tire air pressure should be checked and, if necessary, adjusted before each ride. EWA10500 WARNING ● ● The tire air pressure must be checked and adjusted on cold tires (i.e.
U3B812E0.book Page 19 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR vehicle. Operation of an overloaded vehicle could cause tire damage, an accident, or even injury. Tire inspection EWA10520 WARNING It is dangerous to ride with a wornout tire. When a tire tread begins to show lines, have a Yamaha dealer replace the tire immediately. Brakes, tires and related wheel parts replacement should also be left to a Yamaha dealer.
U3B812E0.
U3B812E0.book Page 21 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR ● After repairing or replacing the rear tire, tighten the valve stem nut and locknut to the specified torques. EAU22011 Accessories and replacement parts EWA10621 WARNING 1 2 1. Valve stem nut 2. Valve stem locknut 6 Tightening torques: Valve stem nut: 1.5 Nm (0.15 m·kgf, 1.08 ft·lbf) Valve stem locknut: 3.0 Nm (0.30 m·kgf, 2.
U3B812E0.book Page 22 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU22020 Adjusting the clutch lever free play EAU22092 NOTE: If the specified free play cannot be obtained as described above or if the clutch does not operate correctly, have a Yamaha dealer check the internal clutch mechanism. 1. Locknut 2. Clutch lever free play adjusting bolt 3. Clutch lever free play Adjusting the brake lever free play 1. Brake lever free play The brake lever free play should measure 5.
U3B812E0.book Page 23 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR system. If there is air in the hydraulic system, have a Yamaha dealer bleed the system before operating the motorcycle. Air in the hydraulic system will diminish the braking performance, which may result in loss of control and an accident. EAU22270 Adjusting the rear brake light switch 1. Locknut 2. Brake lever free play adjusting screw 6 1. Loosen the locknut at the brake lever. 2.
U3B812E0.book Page 24 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU22321 Checking the front and rear brake pads Front brake The front and rear brake pads must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. Each brake pad is provided with a wear indicator groove, which allows you to check the brake pad wear without having to disassemble the brake. To check the brake pad wear, check the wear indicator grooves.
U3B812E0.book Page 25 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR 6 Before riding, check that the brake fluid is above the minimum level mark and replenish if necessary. A low brake fluid level may indicate worn brake pads and/or brake system leakage. If the brake fluid level is low, be sure to check the brake pads for wear and the brake system for leakage. Observe these precautions: ● When checking the fluid level, make sure that the top of the brake fluid reservoir is level.
U3B812E0.book Page 26 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23091 EAU23111 Checking and lubricating the cables Checking and lubricating the throttle grip and cable The operation of all control cables and the condition of the cables should be checked before each ride, and the cables and cable ends should be lubricated if necessary. If a cable is damaged or does not move smoothly, have a Yamaha dealer check or replace it.
U3B812E0.book Page 27 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23141 Recommended lubricants: Brake pedal: Silicone grease Shift pedal: Lithium-soap-based grease (allpurpose grease) 6 EAU23200 Checking and lubricating the brake and clutch levers Checking and lubricating the sidestand The operation of the brake and clutch levers should be checked before each ride, and the lever pivots should be lubricated if necessary.
U3B812E0.book Page 28 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAUM1650 Lubricating the swingarm pivots EAU23250 Lubricating the rear suspension The swingarm pivots must be lubricated at the intervals specified in the periodic maintenance and lubrication chart. EAU23271 Checking the front fork The condition and operation of the front fork must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart.
U3B812E0.book Page 29 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23280 Checking the steering ECA10590 Worn or loose steering bearings may cause danger. Therefore, the operation of the steering must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. 1. Place a stand under the engine to raise the front wheel off the ground.
U3B812E0.book Page 30 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU23290 Checking the wheel bearings EAU23380 EWA10760 Battery WARNING The front and rear wheel bearings must be checked at the intervals specified in the periodic maintenance and lubrication chart. If there is play in the wheel hub or if the wheel does not turn smoothly, have a Yamaha dealer check the wheel bearings. ● 1. Positive battery lead (red) 2.
U3B812E0.book Page 31 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR ● KEEP THIS AND ALL BATTERIES OUT OF THE REACH OF CHILDREN. To charge the battery Have a Yamaha dealer charge the battery as soon as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more quickly if the vehicle is equipped with optional electrical accessories. 6 To store the battery 1.
U3B812E0.book Page 32 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR 1. Remove the rider seat. (See page 3-9.) 2. Remove the quick fasteners shown by pushing the center in with a screwdriver, then pulling the fastener out. 1. Ignitor unit panel 2. Spare main fuse 3. Main fuse 1. Quick fastener 3. Pull the ignitor unit panel outward to the right. 4. Turn the key to “OFF” and turn off the electrical circuit in question. 5.
U3B812E0.book Page 33 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR 8. Place the ignitor unit panel in the original position and install the quick fasteners. NOTE: To install a quick fastener, push its pin back so that it will protrude from the fastener head, then insert the fastener and push the protruding pin in until it is flush with the fastener head. EAU23792 Replacing the headlight bulb This model is equipped with a quartz bulb headlight.
U3B812E0.book Page 34 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR fected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. EAU24281 Replacing a turn signal light bulb or the tail/brake light bulb XVS11AWX/XVS11ATX 1. Remove the lens by removing the screws. 1. Screw 1. Do not touch the glass part of the bulb. 5. Install the headlight bulb cover, and then connect the coupler. 6.
U3B812E0.book Page 35 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU24350 Supporting the motorcycle Since this model is not equipped with a centerstand, follow these precautions when removing the front and rear wheel or performing other maintenance requiring the motorcycle to stand upright. Check that the motorcycle is in a stable and level position before starting any maintenance. A strong wooden box can be placed under the engine for added stability.
U3B812E0.book Page 36 Tuesday, May 15, 2007 2:52 PM PERIODIC MAINTENANCE AND MINOR REPAIR EAU25891 Troubleshooting chart EWA10840 WARNING Keep away open flames and do not smoke while checking or working on the fuel system. 1. Fuel There is enough fuel. Check the compression. There is no fuel. Supply fuel. There is compression. Check the ignition. There is no compression. Have a Yamaha dealer check the vehicle. Check the fuel level in the fuel tank. The engine does not start.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM MOTORCYCLE CARE AND STORAGE EAU37833 Matte color caution ECA15192 CAUTION: Some models are equipped with matte colored finished parts. Be sure to consult a Yamaha dealer for advice on what products to use before cleaning the vehicle. Using a brush, harsh chemical products or cleaning compounds when cleaning these parts will scratch or damage their surface. Wax also should not be applied to any matte colored finished parts.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM MOTORCYCLE CARE AND STORAGE ● ● cleaning products, solvent or thinner, fuel (gasoline), rust removers or inhibitors, brake fluid, antifreeze or electrolyte. Do not use high-pressure washers or steam-jet cleaners since they cause water seepage and deterioration in the following areas: seals (of wheel and swingarm bearings, fork and brakes), electric components (couplers, connectors, instruments, switches and lights), breather hoses and vents.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM MOTORCYCLE CARE AND STORAGE 5. Touch up minor paint damage caused by stones, etc. 6. Wax all painted surfaces. 7. Let the motorcycle dry completely before storing or covering it. EWA11130 WARNING ● ● 7 ● Avoid using abrasive polishing compounds as they will wear away the paint. NOTE: Consult a Yamaha dealer for advice on what products to use. Make sure that there is no oil or wax on the brakes or tires.
U3B812E0.book Page 4 Tuesday, May 15, 2007 2:52 PM MOTORCYCLE CARE AND STORAGE 3. Drain the carburetor float chambers by loosening the drain bolts; this will prevent fuel deposits from building up. Pour the drained fuel into the fuel tank. 4. Fill up the fuel tank and add fuel stabilizer (if available) to prevent the fuel tank from rusting and the fuel from deteriorating. 5. Perform the following steps to protect the cylinders, piston rings, etc. from corrosion. a.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM SPECIFICATIONS Dimensions: 8 Overall length: XVS11ATX 2460 mm (96.9 in) XVS11ATXC 2460 mm (96.9 in) XVS11AWX 2460 mm (96.9 in) XVS11AWXC 2460 mm (96.9 in) XVS11X 2405 mm (94.7 in) XVS11XC 2405 mm (94.7 in) Overall width: XVS11ATX 945 mm (37.2 in) XVS11ATXC 945 mm (37.2 in) XVS11AWX 945 mm (37.2 in) XVS11AWXC 945 mm (37.2 in) XVS11X 895 mm (35.2 in) XVS11XC 895 mm (35.2 in) Overall height: 1100 mm (43.3 in) Seat height: XVS11ATX 710 mm (28.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM SPECIFICATIONS Fuel: Recommended fuel: Unleaded gasoline only Fuel tank capacity: 17.0 L (4.49 US gal) (3.74 Imp.gal) Fuel reserve amount: 4.5 L (1.19 US gal) (0.99 Imp.gal) Carburetor: Manufacturer: MIKUNI Type × quantity: BSR37 x 2 Spark plug (s): Manufacturer/model: NGK/BPR7ES Manufacturer/model: DENSO/W22EPR-U Spark plug gap: 0.7–0.8 mm (0.028–0.
U3B812E0.
U3B812E0.book Page 4 Tuesday, May 15, 2007 2:52 PM SPECIFICATIONS Front brake: Type: Dual disc brake Operation: Right hand operation Recommended fluid: DOT 4 Rear brake: Type: Single disc brake Operation: Right foot operation Recommended fluid: DOT 4 Front suspension: Type: Telescopic fork Spring/shock absorber type: Coil spring/oil damper Wheel travel: 140.0 mm (5.51 in) Rear suspension: Type: Swingarm (link suspension) Spring/shock absorber type: Coil spring/gas-oil damper Wheel travel: 113.0 mm (4.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION EAU26351 Identification numbers EAU26381 EAU26400 Key identification number Vehicle identification number 1. Key identification number 1. Vehicle identification number The key identification number is stamped into the key tag. Record this number in the space provided and use it for reference when ordering a new key. The vehicle identification number is stamped into the steering head pipe.
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION EAU26470 Model label 1. Model label The model label is affixed to the frame under the rider seat. (See page 3-9.) Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer.
U3B812E0.book Page 3 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION EAU26551 Reporting safety defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A.
U3B812E0.
U3B812E0.book Page 5 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION EAU26632 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your vehicle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required. It is not acceptable proof of maintenance work.
U3B812E0.
U3B812E0.book Page 7 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION EAU26663 YAMAHA MOTOR CORPORATION, U.S.A. STREET AND ENDURO MOTORCYCLE LIMITED WARRANTY Yamaha Motor Corporation, U.S.A. hereby warrants that new Yamaha motorcycles will be free from defects in material and workmanship for the period of time stated herein, subject to certain stated limitations.
U3B812E0.book Page 8 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION WARRANTY QUESTIONS AND ANSWERS CUSTOMER SERVICE Q. What costs are my responsibility during the warranty period? A. The customer’s responsibility includes all costs of normal maintenance services, non-warranty repairs, accident and collision damages, and oil, oil filters, air filters, spark plugs, and brake shoes.
U3B812E0.book Page 9 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION EAU26750 YAMAHA EXTENDED SERVICE (Y.E.S.) Keep your Yamaha protected even after your warranty expires with genuine Yamaha Extended Service (Y.E.S.). In addition, Travel and Recreation Interruption Protection (TRIP) is included at no extra cost.
U3B812E0.book Page 10 Tuesday, May 15, 2007 2:52 PM CONSUMER INFORMATION We urge you to act now. You’ll get the excellent benefits of TRIP coverage right away, and you’ll rest easy knowing you’ll have strong factory-backed protection even after your Yamaha Limited Warranty expires. A special note: If visiting your dealer isn’t convenient, contact Yamaha with your Primary ID number (your frame number). We’ll be happy to help you get the Y.E.S. coverage you need. Yamaha Service Marketing P.O.
U3B812E0.book Page 1 Tuesday, May 15, 2007 2:52 PM INDEX A Front fork, checking .............................. 6-28 Fuel......................................................... 3-7 Fuel cock ................................................ 3-8 Fuel tank cap .......................................... 3-6 Fuses, replacing ................................... 6-31 Accessories and replacement parts...... 6-21 Air filter element, cleaning..................... 6-13 B Battery...................................
U3B812E0.book Page 2 Tuesday, May 15, 2007 2:52 PM INDEX Tires (XVS11AWX/XVS11ATX)............ 6-18 Tires (XVS11X)..................................... 6-15 Tool kit .................................................... 6-1 Troubleshooting.................................... 6-35 Troubleshooting chart ........................... 6-36 Turn signal indicator light........................ 3-2 Turn signal light bulb or tail/brake light bulb, replacing .................................... 6-34 Turn signal switch.
A5-yoko_Blank.
A5-yoko_Blank.
YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2007.05-1.