Service manual

7-16
1
2
3
4
5
6
7
8
9
A
3. Replace the fuel level sensor if out of
specification.
4. Replace the multifunction meter if the
fuel level sensor resistance is within
specification.
Engine overheat warning indicator
1. Check the thermoswitch if engine over-
heat warning indicator does not come on.
See “Thermoswitch” (7-8).
2. Start the engine.
3. Disconnect the thermoswitch connectors
1, and then connect the jumper lead to
the disconnected connector.
4. Check that the “WARNING” indicator
light and the engine overheat warning
indicator blink, and the buzzer begins to
sound intermittently.
Buzzer
1. Connect the positive battery lead to the
terminal 1 and the negative battery lead
to the terminal 2.
2. Check that the buzzer sounds. Replace
the buzzer if does not sound.
Float position Resistance (Ω)
A757.0–803.0
B0–8
AB
P
B
1
1
R
2
B
Indication system