Service manual

8-22
1
2
3
4
5
6
7
8
9
A
TIP:
Align the projection a with the slit b.
Ventilation hose installation
1. Install the grommets 1.
TIP:
Make sure that the grommet 1 is properly
seated in the hole in the inner hull 2.
2. Install the ventilation hoses 3.
TIP:
• Make sure to route the ventilation hose
(PORT) in front of the ventilation hose
(STBD).
• Make sure that the end of the ventilation
hose 3 is the specified distance a from
the groove around the outside of the grom-
met 1.
Cooling water pilot outlet nut 3:
4 N·m (0.4 kgf·m, 3.0 ft·lb)
3
1
2
b
a
1
1
2
2
Installation distance a:
30–40 mm (1.18–1.57 in)
3
22
a
1
3
Ventilation hose and water separator