Service manual

HULL
HOOD
Hull and hood
8-29
Drain plug check
1. Check the drain plug 1 and O-ring 2.
Replace if cracked or damaged.
Spout installation
1. Install the spout 1, and then tighten the
nut 2 to the specified torque.
2. Install the hose 3, and then tighten the
clamp 4 to the specified torque.
TIP:
Face the mark a toward the bow.
Spout nut 2: 5 N·m (0.5 kgf·m, 3.7 ft·lb)
Spout hose clamp 4:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
1
2
4
1
a
2
3
BOW