Service manual

4-10
1
2
3
4
5
6
7
8
9
A
Choke cable and throttle cable
installation
1. Install the choke cable 1 and throttle
cable 2, and then tighten the nuts to the
specified torque.
2. Adjust the throttle lever free play. See
“Steering system” (3-2).
Carburetor assy. check
1. Adjust the trolling speed. See “Power
unit” (3-4).
Choke cable and throttle cable guide
installation position a:
14.0 ± 1.0 mm (0.55 ± 0.04 in)
Choke cable nut b:
8 N·m (0.8 kgf·m, 5.9 ft·lb)
Throttle cable nut c:
8 N·m (0.8 kgf·m, 5.9 ft·lb)
1
b
c
2
a
Carburetor unit