Owner`s manual

5-8
E
EMU01513
Emergency Starting Engine
1) Remove the top cowling.
2) Remove the start-in-gear protection
cable from the starter if equipped.
3) Remove the starter/flywheel cover after
removing the bolt(s).
4) Prepare the engine for starting. Refer to
“STARTING ENGINE” for details. Be
sure the engine is in Neutral and that
the lock plate is attached to the engine
stop lanyard switch. The main switch
must be “ON” if equipped.
5) Pull out the choke knob when starting a
cold engine. After the engine starts,
gradually return the choke knob to the
home position as the engine warms up.
001316
ON
STARTOFF
305034
ON
STARTOFF
ON
STARTOFF
60H-9-E1-5 3/1/02 9:41 PM Page 9