Owner`s manual

3-16
E
EMU00248
PROCEDURE FOR REMOTE
CONTROL MODELS
4) Place the remote control lever in the
Neutral position.
NOTE:
The start-in-gear protection device permits
the engine to be started only when it is in
Neutral.
N
701015
N
702025
000293
ON
STARTOFF
ON
STARTOFF
000714
5) Attach the engine stop switch lanyard
to a secure place on your clothing, or
your arm or leg. Then, install the lock
plate on the other end of the lanyard in
the engine stop switch.
w
8 Attach the engine stop switch lanyard
to a secure place on your clothing,
your arm or leg while operating.
8 Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
8 Avoid accidentally pulling the lanyard
during normal operation. Loss of
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly.
This could cause people and objects
in the boat to be thrown forward.
60H-9-E1-3 3/1/02 9:38 PM Page 17