Read this manual carefully before operating this vehicle.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM EAU10042 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM INTRODUCTION EAU10083 Congratulations on your purchase of the Yamaha VMX17A(C). This model is the result of Yamaha’s vast experience in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM IMPORTANT MANUAL INFORMATION EAU10132 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING NOTICE TIP A WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM IMPORTANT MANUAL INFORMATION EAU10193 VMX17A(C) OWNER’S MANUAL ©2010 by Yamaha Motor Corporation, U.S.A. 1st edition, May 2010 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Japan.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM TABLE OF CONTENTS LOCATION OF IMPORTANT LABELS .............................................1-1 SAFETY INFORMATION ..................2-1 DESCRIPTION ..................................3-1 Left view ..........................................3-1 Right view ........................................3-2 Controls and instruments.................3-3 INSTRUMENT AND CONTROL FUNCTIONS .......................................4-1 Main switch/steering lock ..............
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM TABLE OF CONTENTS Checking the wheel bearings .......7-31 Battery ..........................................7-32 Replacing the fuses ......................7-34 Replacing the headlight bulb ........7-36 Tail/brake light ..............................7-37 Replacing a turn signal light bulb ...........................................7-38 Replacing a license plate light bulb ...........................................7-38 Replacing the auxiliary light bulb ..
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM LOCATION OF IMPORTANT LABELS EAU10384 1 Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM LOCATION OF IMPORTANT LABELS 1 1 4 WARNING TIRE INFORMATION BEFORE YOU OPERATE THIS VEHICLE, READ THE OWNER’S MANUAL AND ALL LABELS. ALWAYS WEAR AN APPROVED MOTORCYCLE HELMET, eye protection, and protective clothing. Cold tire normal pressure should be set as follows. • Up to 90 kg (198 lbs) load FRONT : 250 kPa, (2.50 kgf/cm²), 36 psi REAR : 290 kPa, (2.90 kgf/cm²), 42 psi • 90kg (198 lbs) ~ maximum load FRONT : 250 kPa, (2.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM SAFETY INFORMATION EAU10287 2 Be a Responsible Owner As the vehicle’s owner, you are responsible for the safe and proper operation of your motorcycle. Motorcycles are single-track vehicles. Their safe use and operation are dependent upon the use of proper riding techniques as well as the expertise of the operator. Every operator should know the following requirements before riding this motorcycle.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM SAFETY INFORMATION ● ● due to excessive speed or undercornering (insufficient lean angle for the speed). • Always obey the speed limit and never travel faster than warranted by road and traffic conditions. • Always signal before turning or changing lanes. Make sure that other motorists can see you. The posture of the operator and passenger is important for proper control.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM SAFETY INFORMATION ● ● 2 Do not run engine in poorly ventilated or partially enclosed areas such as barns, garages, or carports. Do not run engine outdoors where engine exhaust can be drawn into a building through openings such as windows and doors. Loading Adding accessories or cargo to your motorcycle can adversely affect stability and handling if the weight distribution of the motorcycle is changed.
U2S312E0.book Page 4 Thursday, June 3, 2010 9:43 AM SAFETY INFORMATION modifications not specifically recommended by Yamaha, even if sold and installed by a Yamaha dealer. Aftermarket Parts, Accessories, and Modifications While you may find aftermarket products similar in design and quality to genuine Yamaha accessories, recognize that some aftermarket accessories or modifications are not suitable because of potential safety hazards to you or others.
U2S312E0.book Page 5 Thursday, June 3, 2010 9:43 AM SAFETY INFORMATION ● ● 2 ● ● ● Check that the fuel cock (if equipped) is in the “OFF” position and that there are no fuel leaks. Point the front wheel straight ahead on the trailer or in the truck bed, and choke it in a rail to prevent movement. Shift the transmission in gear (for models with a manual transmission).
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM DESCRIPTION EAU10410 Left view 1 2 3 5 4 6 7 8 3 16 15 1. 2. 3. 4. 5. 6. 7. 8. 14 13 12 11 10 9 9. Final gear oil check bolt (page 7-15) 10.Final gear oil drain bolt (page 7-15) 11.Shock absorber assembly rebound damping force adjusting knob (page 4-25) 12.Sidestand (page 4-28) 13.Shift pedal (page 4-16) 14.Engine oil drain bolt (page 7-12) 15.Engine oil filter cartridge (page 7-12) 16.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM DESCRIPTION EAU10420 Right view 1 2 3 4 5 6 3 11 1. 2. 3. 4. 5. 6. 7. 8. 9 8 10 7 9. Brake pedal (page 4-17) 10.Fuse box 2 (page 7-34) 11.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM DESCRIPTION EAU10430 Controls and instruments 1 2 3 4 5 6 7 8 3 11 1. 2. 3. 4. 5. 6. 7. 8. 10 9 9. Throttle grip (page 7-21) 10.Multi-function display (page 4-6) 11.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS EAU10460 TIP The headlight comes on automatically when the engine is started and stays on until the key is turned to “OFF”, even if the engine stalls. Main switch/steering lock OFF ON To lock the steering 1 2 EAU10661 OFF All electrical systems are off. The key can be removed. LOCK 4 EWA10061 The main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS To unlock the steering 1 2 EAU49391 Indicator lights and warning lights 1 10 9 2 8 7 6 3 4 5 1. Push. 2. Turn. Push the key in, and then turn it to “OFF” while still pushing it. 1. 2. 3. 4. 5. 6. 7. 8. 9.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 3. If the warning light comes on and does not go off, check the engine oil level. (See page 7-12.) If the warning light still stays on after confirming the oil level is correct, have a Yamaha dealer check the vehicle.
U2S312E0.book Page 4 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS TIP ● ● EAU39502 EAU48520 ABS warning light “ ” If this warning light comes on or flashes while riding, the ABS may not work correctly. If this occurs, have a Yamaha dealer check the system as soon as possible. (See page 4-17.) Shift timing indicator light This indicator light can be set to come on and go off at the desired engine speeds and is used to inform the rider when it is time to shift to the next higher gear.
U2S312E0.book Page 5 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS Shift timing indicator light See page 4-7 for an explanation and settings for this indicator light. EAU46354 Speedometer unit 2 1 2 1 3 4 4 1. 2. 3. 4. Tachometer Shift timing indicator light Tachometer red zone Speedometer Speedometer The speedometer can be switched between miles and kilometers. To switch the speedometer, press the “SELECT” button for at least two seconds.
U2S312E0.book Page 6 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS ● EAU46598 Multi-function display ● 1 1 ● 2 1. “SELECT” button 2. “RESET” button 1. Multi-function display EWA12312 WARNING Be sure to stop the vehicle before making any setting changes to the multi-function display. Changing settings while riding can distract the operator and increase the risk of an accident. A “SELECT” button and a “RESET” button are located on the handlebar holder.
U2S312E0.book Page 7 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 4 Tripmeters Turn the key to “ON”. Push “SELECT” to switch the display between the tripmeters “TRIP-1” and “TRIP-2” in the following order. TRIP-1 → TRIP-2 → TRIP-1 When the fuel amount in the fuel tank decreases to 3.9 L (1.03 US gal, 0.86 Imp.
U2S312E0.book Page 8 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS Selecting the shift timing indicator light settings 1 The following items can be set/adjusted in this mode: ● brightness ● shift timing indicator light ● clock ● stopwatch ● countdown clock ● system status ● maintenance counters TIP To return to the Normal mode, push “SELECT” to scroll to “ ”, then push “RESET”.
U2S312E0.book Page 9 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 4. Push “RESET”. Push “SELECT” and highlight “On” to activate the indicator light; the indicator light comes on and stays on when activated. 4 Push “SELECT” and highlight “Flash” to activate the indicator light; the indicator light flashes when activated. Push “SELECT” and highlight “Off” to deactivate the indicator light; the indicator light neither comes on nor flashes.
U2S312E0.book Page 10 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 5. Push “RESET” to set the selected engine speed. “Off” is highlighted and the r/min digits start flashing. 6. Push “SELECT” to highlight the engine speed at which the shift timing indicator light is deactivated. 7. Push “RESET” to set the selected engine speed. 8. Push “RESET” again to return to the previous menu. To set individual gear r/min: 1.
U2S312E0.book Page 11 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 5. Push “RESET”, and the minute digits start flashing. 6. Push “SELECT” to increment the minutes. 7. Push “RESET” to start the clock. 8. Push “RESET” again to return to the previous menu. 4 Resetting all the brightness and shift timing indicator light functions: This resets all settings made to the brightness and shift timing indicator light functions. 1. Push “SELECT” to highlight “Display”. 2. Push “RESET”. 3.
U2S312E0.book Page 12 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS ● ● Pushing “RESET” for at least two seconds changes the screen to the Normal mode. To perform further multi-function display settings, enter the Select mode again by pushing and holding “SELECT” and “RESET” for at least three seconds. Using the countdown clock: The countdown clock can be activated as follows. 1. Push “SELECT” to highlight “Stopwatch”. 2. Push “RESET”. 3. Push “SELECT” “Countdown”. to highlight 4.
U2S312E0.book Page 13 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS ● light or coolant temperature warning light comes on, the Normal mode is automatically displayed. 1 2 3 1. Push “SELECT” to highlight “System status”, then push “RESET”. ● 6 4 2. Push “SELECT” to highlight “Yes”, then push “RESET”. (Highlighting “No” and pushing “RESET” returns to the previous menu.) The display changes to the status screen. 1. 2. 3. 4. 5. 6.
U2S312E0.book Page 14 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 4. Push “RESET” to reset the item. TIP ● ● The bottom area was left blank for another item the rider cares to check the distance of since it has been changed, replaced or checked (i.e., air filter element, engine parts, etc.). Letters and numbers cannot be entered in the blank area. EAU12348 TIP The display indicates error codes only in the Normal mode.
U2S312E0.book Page 15 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS EAU12400 EAU12711 Dimmer switch “ / ” Set this switch to “ ” for the high beam and to “ ” for the low beam. Start switch “ ” Push this switch to crank the engine with the starter. See page 6-1 for starting instructions prior to starting the engine. EAU12460 4 Turn signal switch “ / ” To signal a right-hand turn, push this switch to “ ”. To signal a left-hand turn, push this switch to “ ”.
U2S312E0.book Page 16 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS Make sure that the appropriate setting on the adjusting dial is aligned with the arrow mark on the clutch lever. The clutch lever is equipped with a clutch switch, which is part of the ignition circuit cut-off system. (See page 4-28.) EAU12871 Shift pedal EAU33851 Brake lever 1 4 3 2 1 4 1.
U2S312E0.book Page 17 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS be sure to set it by aligning a groove on the adjusting knob with the “ ” mark on the brake lever. EAU12941 Brake pedal EAU46392 ABS 1 The Yamaha ABS (Anti-lock Brake System) features a dual electronic control system, which acts on the front and rear brakes independently. The ABS is monitored by an ECU, which will have recourse to manual braking if a malfunction occurs. EWA10090 WARNING 4 ● 1.
U2S312E0.book Page 18 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS ● This ABS has a test mode which allows the owner to experience the pulsating at the brake lever or brake pedal when the ABS is operating. However, special tools are required, so please consult your Yamaha dealer when performing this test. EAU46850 Fuel tank cap To remove the fuel tank cap 1. Pull the rider seat backrest release lever on the left side of the vehicle as shown. The backrest will slide forward.
U2S312E0.book Page 19 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 2. Insert the key into the lock, and then turn it 1/4 turn clockwise. The lock will be released and the fuel tank cap can be removed. EAU13212 Fuel Make sure there is sufficient gasoline in the tank. EWA10881 WARNING 1 Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions. 1 1. Match marks 4 1. Unlock.
U2S312E0.book Page 20 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS 1 2 ately. If gasoline spills on your skin, wash with soap and water. If gasoline spills on your clothing, change your clothes. EAU13381 1. Fuel tank filler tube 2. Maximum fuel level 3. Wipe up any spilled fuel immediately. NOTICE: Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts. [ECA10071] 4. Be sure to securely close the fuel tank cap.
U2S312E0.book Page 21 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS EAU48760 Fuel tank breather/overflow hose EAU13445 NOTICE This vehicle is equipped with catalytic converters in the exhaust system. Use only unleaded gasoline. The use of leaded gasoline will cause unrepairable damage to the catalytic converter. EWA10862 WARNING 4 1 2 1. Fuel tank breather hose 2. Fuel tank overflow hose TIP For California: See page 7-12 for breather hose information.
U2S312E0.book Page 22 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS EAU46840 Seats 1 1 Rider seat To remove the rider seat 1. Pull the rider seat backrest release lever on the left side of the vehicle as shown. The backrest will slide forward. 1 2 1. Rider seat backrest 2. Remove the bolts, and then pull the rider seat off. 1. Projection 2. Seat holder 2. Place the rider seat in the original position, and then tighten the bolts.
U2S312E0.book Page 23 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS EAU14733 Adjusting the front fork 1 EWA10180 1 2 WARNING Always adjust both fork legs equally, otherwise poor handling and loss of stability may result. 4 1. Rider seat backrest release lever 2. Remove the bolts, and then pull the passenger seat off. 2 This front fork is equipped with spring preload adjusting bolts, rebound damping force adjusting knobs and compression damping force adjusting screws. 1.
U2S312E0.book Page 24 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS (a) Spring preload setting: Minimum (soft): 5 Standard: 4 Maximum (hard): 1 1 (b) 1. Spring preload adjusting bolt Align the appropriate groove on the adjusting mechanism with the top of the front fork cap bolt. 1 3 54 21 Rebound damping force To increase the rebound damping force and thereby harden the rebound damping, turn the adjusting knob on each fork leg in direction (a).
U2S312E0.
U2S312E0.book Page 26 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS Rebound damping force To increase the rebound damping force and thereby harden the rebound damping, turn the adjusting knob in direction (a). To decrease the rebound damping force and thereby soften the rebound damping, turn the adjusting knob in direction (b). Compression damping force To increase the compression damping force and thereby harden the compression damping, turn the adjusting knob in direction (a).
U2S312E0.book Page 27 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS ● 4 Do not dispose of a damaged or worn-out shock absorber assembly yourself. Take the shock absorber assembly to a Yamaha dealer for any service. EAU48730 Luggage strap holders 1 1 1. Luggage strap holder There are four luggage strap holders: one on each passenger footrest and two on the inside of the rear fender.
U2S312E0.book Page 28 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS EAU15304 Sidestand The sidestand is located on the left side of the frame. Raise the sidestand or lower it with your foot while holding the vehicle upright. this system regularly and have a Yamaha dealer repair it if it does not function properly. TIP The built-in sidestand switch is part of the ignition circuit cut-off system, which cuts the ignition in certain situations.
U2S312E0.book Page 29 Thursday, June 3, 2010 9:43 AM INSTRUMENT AND CONTROL FUNCTIONS With the engine turned off: 1. Move the sidestand down. 2. Make sure that the engine stop switch is set to “ 3. Turn the key on. 4. Shift the transmission into the neutral position. 5. Push the start switch. Does the engine start? YES 4 WARNING If a malfunction is noted, have a Yamaha dealer check the system before riding. ”. NO The neutral switch may not be working correctly.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM FOR YOUR SAFETY – PRE-OPERATION CHECKS EAU15596 Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner’s Manual. EWA11151 WARNING Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage. Do not operate the vehicle if you find any problem.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM CHECKS Rear brake • • • • • • • Clutch • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check hydraulic system for leakage. Throttle grip • Make sure that operation is smooth. • Check throttle grip free play. • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing. Control cables • Make sure that operation is smooth.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM Sidestand switch CHECKS • Check operation of ignition circuit cut-off system. • If system is not working correctly, have Yamaha dealer check vehicle.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM OPERATION AND IMPORTANT RIDING POINTS EAU15951 EAU48710 EAU46515 Starting the engine Read the Owner’s Manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your Yamaha dealer. EWA10271 WARNING Failure to familiarize yourself with the controls can lead to loss of control, which could cause an accident or injury.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM OPERATION AND IMPORTANT RIDING POINTS ECA11833 EAU16671 Shifting NOTICE If a warning or indicator light does not come on initially when the key is turned to “ON”, or if a warning or indicator light remains on, see page 4-2 for the corresponding warning and indicator light circuit check. 2. Shift the transmission into the neutral position. The neutral indicator light should come on. If not, ask a Yamaha dealer to check the electrical circuit. 3.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM OPERATION AND IMPORTANT RIDING POINTS 4. At the recommended shift points shown in the following table, close the throttle, and at the same time, quickly pull the clutch lever in. 5. Shift the transmission into second gear. (Make sure not to shift the transmission into the neutral position.) 6. Open the throttle part way and gradually release the clutch lever. 7. Follow the same procedure when shifting to the next higher gear.
U2S312E0.book Page 4 Thursday, June 3, 2010 9:43 AM OPERATION AND IMPORTANT RIDING POINTS 1000–1600 km (600–1000 mi) Avoid prolonged operation above 5700 r/min. 1600 km (1000 mi) and beyond The vehicle can now be operated normally. ECA10310 EAU17213 Parking When parking, stop the engine, and then remove the key from the main switch. EWA10311 WARNING ● NOTICE ● ● Keep the engine speed out of the tachometer red zone.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU17243 EWA15121 EAU17302 WARNING 7 Periodic inspection, adjustment, and lubrication will keep your vehicle in the safest and most efficient condition possible. Safety is an obligation of the vehicle owner/operator. The most important points of vehicle inspection, adjustment, and lubrication are explained on the following pages.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU17341 Owner’s tool kit 1 1. Owner’s tool kit The owner’s tool kit is located behind panel A. (See page 7-9.) The service information included in this manual and the tools provided in the owner’s tool kit are intended to assist you in the performance of preventive maintenance and minor repairs. However, additional tools such as a torque wrench may be necessary to perform certain maintenance work correctly.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU48490 TIP ● ● From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months. Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service. EAU17601 Periodic maintenance chart for the emission control system INITIAL No.
U2S312E0.book Page 4 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL No. ITEM ROUTINE 7 * Evaporative emission control system (for California only) • Check control system for damage. • Replace if necessary. 8 * Air induction system • Check the air cut-off valve, reed valve, and hose for damage. • Replace any damaged parts.
U2S312E0.book Page 5 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU32186 General maintenance and lubrication chart INITIAL No. 7 ITEM ROUTINE 600 mi (1000 km) or 1 month ODOMETER READINGS 4000 mi (7000 km) or 6 months 8000 mi 12000 mi 16000 mi 20000 mi (13000 km) (19000 km) (25000 km) (31000 km) or or or or 12 months 18 months 24 months 30 months 1 * Air filter element • Replace. Every 24000 mi (37000 km) 2 * Clutch • Check operation and fluid leakage.
U2S312E0.book Page 6 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL No. ITEM ROUTINE Swingarm pivot bearings • Check bearing assemblies for looseness. • Moderately repack with lithiumsoap-based grease. 10 * Steering bearings • Check bearing assemblies for looseness. • Moderately repack with lithiumsoap-based grease every 16000 mi (25000 km) or 24 months.
U2S312E0.book Page 7 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL No. ITEM ROUTINE 600 mi (1000 km) or 1 month ODOMETER READINGS 4000 mi (7000 km) or 6 months 8000 mi 12000 mi 16000 mi 20000 mi (13000 km) (19000 km) (25000 km) (31000 km) or or or or 12 months 18 months 24 months 30 months 18 * Front fork • Check operation and for oil leakage. • Replace if necessary. √ √ √ √ √ 19 * Shock absorber assembly • Check operation and for oil leakage.
U2S312E0.book Page 8 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL No. ITEM ROUTINE 27 * Control cables • Apply Yamaha chain and cable lube or engine oil thoroughly. 28 * Throttle grip • Check operation. • Check throttle grip free play, and adjust if necessary. • Lubricate cable and grip housing. 29 * Lights, signals and switches • Check operation. • Adjust headlight beam.
U2S312E0.book Page 9 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU18722 Removing and installing the cowling and panels The cowling and panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time the cowling or a panel needs to be removed and installed. 1 2 1 1 1 1. Panel B 2. Panel C 1 1. Bolt 2 EAU46430 Cowling A 7 1. Cowling A 2. Panel A 1 To install the cowling 1.
U2S312E0.book Page 10 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 2. Pull the panel outward. EAU46471 To install the panel Place the panel in the original position, and then install the bolt. Panel A To remove the panel 1. Insert the key into the lock, and then turn it 1/4 turn clockwise. 1 2. Turn the key counterclockwise to the original position, and then remove it. 2 1. Unlock. 2. Panel A Panel B Panel C To remove the panel 1. Remove the bolt. To remove the panel 1.
U2S312E0.book Page 11 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU46680 Checking the spark plugs 2 1 1. Panel C 2. Bolt To install the panel Place the panel in the original position, and then install the bolt. 7 The spark plugs are important engine components, which should be checked periodically, preferably by a Yamaha dealer.
U2S312E0.book Page 12 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU19681 Tightening torque: Spark plug: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) Canister (for California only) The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter cartridge replaced at the intervals specified in the periodic maintenance and lubrication chart.
U2S312E0.book Page 13 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 4. Remove the engine oil filler cap, the engine oil drain bolt and its gasket to drain the oil from the crankcase. 2 3 1 1 TIP Skip steps 5–7 if the oil filter cartridge is not being replaced. 5. Remove the oil filter cartridge with an oil filter wrench. 1 1. Engine oil level check window 2. Maximum level mark 3. Minimum level mark 4.
U2S312E0.book Page 14 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT Recommended engine oil: See page 9-1. Oil quantity: Without oil filter cartridge replacement: 4.30 L (4.55 US qt, 3.78 Imp.qt) With oil filter cartridge replacement: 4.70 L (4.97 US qt, 4.14 Imp.qt) 1 1. O-ring TIP Make sure that the O-ring is properly seated. 7. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. 1.
U2S312E0.book Page 15 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 10. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. TIP After the engine is started, the engine oil level warning light should go off if the oil level is sufficient. EAU46577 Final gear oil The final gear case must be checked for oil leakage before each ride.
U2S312E0.book Page 16 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 1 2 3 4 7. Install the final gear case breather cap by installing the washer and bolt, and then tighten the bolt to the specified torque. 1 2 3 Tightening torque: Final gear case breather cap bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 4 5 1. 2. 3. 4. 5. Final gear case breather cap bolt Washer Final gear case breather cap Final gear oil filler bolt Gasket 4. Check the gaskets for damage, and replace them if necessary.
U2S312E0.book Page 17 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 1 2 2 1 5. Install the drain bolt and its new gasket, and then tighten the bolt to the specified torque. 7 10. Install the final gear case breather cap by installing the washer and bolt, and then tighten the bolt to the specified torque. 1 1. Final gear oil drain bolt 2. Gasket Tightening torque: Final gear oil drain bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 6. Remove the final gear oil check bolt and its gasket.
U2S312E0.book Page 18 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU20070 Coolant 2 1 The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. 4 5 EAU46691 To check the coolant level 1. Place the vehicle on a level surface and hold it in an upright position.
U2S312E0.book Page 19 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 3. Remove the air intake duct by removing the bolts. 2 1 1 1 1. Bolt 2. Air intake duct 7 1. Radiator cap 6. Remove the coolant reservoir cover and coolant reservoir by removing the bolts. 4. Place a container under the engine to collect the used coolant. 5. Remove the radiator cap. WARNING! Never attempt to remove the radiator cap when the engine is hot. [EWA10381] 3 2 7.
U2S312E0.book Page 20 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 13. Hold the vehicle upright, and pour the specified amount of the recommended coolant into the radiator and reservoir. NOTICE: Failing to hold the vehicle upright when filling the radiator with coolant may cause air to be trapped in the cooling system.
U2S312E0.book Page 21 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU44734 Checking the engine idling speed EAU21384 Checking the throttle grip free play Check the engine idling speed and, if necessary, have it corrected by a Yamaha dealer. Engine idling speed: 950–1050 r/min 1 1. Throttle grip free play 7 The throttle grip free play should measure 3.0–5.0 mm (0.12–0.20 in) at the inner edge of the throttle grip.
U2S312E0.book Page 22 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU21754 Tires To maximize the performance, durability, and safe operation of your motorcycle, note the following points regarding the specified tires. Tire air pressure The tire air pressure should be checked and, if necessary, adjusted before each ride. EWA10503 WARNING Operation of this vehicle with improper tire pressure may cause severe injury or death from loss of control.
U2S312E0.book Page 23 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EWA10581 ● Tire information WARNING ● ● ● 7 It is dangerous to ride with a worn-out tire. When a tire tread begins to show crosswise lines, have a Yamaha dealer replace the tire immediately. The replacement of all wheeland brake-related parts, including the tires, should be left to a Yamaha dealer, who has the necessary professional knowledge and experience to do so.
U2S312E0.book Page 24 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT ● ● ● ● Use only the specified replacement tires. Other tires may run the danger of bursting at super high speeds. Brand-new tires can have a relatively poor grip on certain road surfaces until they have been “broken in”. Therefore, it is advisable before doing any highspeed riding to ride conservatively for approximately 100 km (60 mi) after installing a new tire.
U2S312E0.book Page 25 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU37913 Checking the brake lever free play braking performance, which may result in loss of control and an accident. 1 1. No brake lever free play 7 There should be no free play at the brake lever end. If there is free play, have a Yamaha dealer inspect the brake system. EWA14211 WARNING A soft or spongy feeling in the brake lever can indicate the presence of air in the hydraulic system.
U2S312E0.book Page 26 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT Checking the front and rear brake pads wear indicator groove almost appears, have a Yamaha dealer replace the brake pads as a set. The front and rear brake pads must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. Rear brake pads EAU22392 EAU46540 Checking the brake fluid level Front brake EAU22470 EAU43062 1 Front brake pads 1 1.
U2S312E0.book Page 27 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT Before riding, check that the brake fluid is above the minimum level mark and replenish if necessary. A low brake fluid level may indicate worn brake pads and/or brake system leakage. If the brake fluid level is low, be sure to check the brake pads for wear and the brake system for leakage. TIP The rear brake fluid reservoir is located under the passenger seat. (See page 4-22.
U2S312E0.book Page 28 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU23113 EAU23093 Checking and lubricating the cables Checking and lubricating the throttle grip and cable The operation of all control cables and the condition of the cables should be checked before each ride, and the cables and cable ends should be lubricated if necessary. If a cable is damaged or does not move smoothly, have a Yamaha dealer check or replace it.
U2S312E0.book Page 29 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU43600 Recommended lubricant: Lithium-soap-based grease Checking and lubricating the brake and clutch levers Brake lever Clutch lever 7 The operation of the brake and clutch levers should be checked before each ride, and the lever pivots should be lubricated if necessary.
U2S312E0.book Page 30 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU23202 Checking and lubricating the sidestand EAUM1651 Lubricating the swingarm pivots EAU23272 Checking the front fork The condition and operation of the front fork must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the condition Check the inner tubes for scratches, damage and excessive oil leakage.
U2S312E0.book Page 31 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU23283 Checking the steering ECA10590 NOTICE If any damage is found or the front fork does not operate smoothly, have a Yamaha dealer check or repair it. 7 Worn or loose steering bearings may cause danger. Therefore, the operation of the steering must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. 1.
U2S312E0.book Page 32 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU46555 Battery The battery is located under cowling A. (See page 7-9.) This model is equipped with a VRLA (Valve Regulated Lead Acid) battery. There is no need to check the electrolyte or to add distilled water. However, the battery lead connections need to be checked and, if necessary, tightened. EWA10760 WARNING ● Electrolyte is poisonous and dangerous since it contains sulfuric acid, which causes severe burns.
U2S312E0.book Page 33 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 4. Remove the main fuse (together with the holding band) from its holder. 5. Disconnect coupler A. 7. Unfold the shown. heat insulator as 1 1 2 2 3 1. Heat insulator 2. Battery 1. Main fuse 2. Holding band 3. Coupler A 7 8. Pull the battery out of its compartment. 6. Remove the rubber damper. 1 To charge the battery Have a Yamaha dealer charge the battery as soon as possible if it seems to have discharged.
U2S312E0.book Page 34 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 1. Place the battery in its compartment. 2. Fold the heat insulator back to its original position. NOTICE: Make sure that the heat insulator is in its original position and it is properly folded. [ECA16550] 1 battery, be sure the key is turned to “OFF”, then connect the positive lead before connecting the negative lead. [ECA16840] 8. Install the cowling.
U2S312E0.book Page 35 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 12 7 1 34 9 2 1. ABS solenoid fuse 2. Fuel injection system fuse 3. Spare fuse Fuse box 2 is located behind panel B. (See page 7-9.) 56 7 8 3 7 avoid causing extensive damage to the electrical system and possibly a fire. [EWA15131] Fuse box 2 Fuse box 1 1. 2. 3. 4. 5. 6. 7. 8. 9.
U2S312E0.book Page 36 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. EAU46461 Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows.
U2S312E0.book Page 37 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 1 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the bolts. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 2 1. Headlight coupler 2. Headlight bulb cover 3. Unhook the headlight bulb holder, and then remove the burnt-out bulb. 1 7 1. Headlight bulb holder 4.
U2S312E0.book Page 38 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU24204 EAU50450 Replacing a turn signal light bulb Replacing a license plate light bulb 1. Remove the turn signal light lens by removing the screw. 1. Remove the holding plate by removing the bolts. 1 2 1. Turn signal light bulb 2 1 1. Screw 2. Turn signal light lens 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3.
U2S312E0.book Page 39 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT 1 2 2 1 1. Bolt 2. License plate light unit 7 3. Pull the license plate light unit outward as shown to access the bulb and its socket. 4. Remove the license plate light socket (together with the bulb) by turning it counterclockwise, and then pulling it out. 1. License plate light bulb socket 2. License plate light unit 5. Remove the burnt-out bulb by pulling it out. 1 1. License plate light bulb 6.
U2S312E0.book Page 40 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU46403 EAU24350 Replacing the auxiliary light bulb If the auxiliary light bulb burns out, replace it as follows. 1. Remove the headlight unit. (See page 7-36.) 2. Remove the auxiliary light socket (together with the bulb) by turning it counterclockwise. 1 Supporting the motorcycle 1 1. Auxiliary light bulb 4. Insert a new bulb into the socket. 5.
U2S312E0.book Page 41 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT a jack either under each side of the frame in front of the rear wheel or under each side of the swingarm. 7 EAU25871 Troubleshooting Although Yamaha motorcycles receive a thorough inspection before shipment from the factory, trouble may occur during operation. Any problem in the fuel, compression, or ignition systems, for example, can cause poor starting and loss of power.
U2S312E0.book Page 42 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT EAU46791 Troubleshooting charts Starting problems or poor engine performance 1. Fuel There is enough fuel. Check the compression. There is no fuel. Supply fuel. There is compression. Check the ignition. There is no compression. Have a Yamaha dealer check the vehicle. Check the fuel level in the fuel tank. The engine does not start. Check the compression. 2. Compression Operate the electric starter. 3.
U2S312E0.book Page 43 Thursday, June 3, 2010 9:43 AM PERIODIC MAINTENANCE AND ADJUSTMENT Engine overheating EWAT1040 WARNING ● ● Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled. Place a thick rag, like a towel, over the radiator cap, and then slowly rotate the cap counterclockwise to the detent to allow any residual pressure to escape.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM MOTORCYCLE CARE AND STORAGE EAU37833 Matte color caution ucts onto seals, gaskets and wheel axles. Always rinse the dirt and degreaser off with water. EAU46410 Care ECA15192 NOTICE Some models are equipped with matte colored finished parts. Be sure to consult a Yamaha dealer for advice on what products to use before cleaning the vehicle.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM MOTORCYCLE CARE AND STORAGE ● ● 8 ● off any detergent residue using plenty of water, as it is harmful to plastic parts. Do not use any harsh chemical products on plastic parts. Be sure to avoid using cloths or sponges which have been in contact with strong or abrasive cleaning products, solvent or thinner, fuel (gasoline), rust removers or inhibitors, brake fluid, antifreeze or electrolyte.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM MOTORCYCLE CARE AND STORAGE ● ● ● Never use compounds or other special treatments to clean the titanium mufflers, as they will remove the finish on the outer surface of the mufflers. Even the smallest amounts of oil, such as from oily towels or fingerprints, will leave stains on the titanium mufflers, which can be removed with a mild detergent.
U2S312E0.book Page 4 Thursday, June 3, 2010 9:43 AM MOTORCYCLE CARE AND STORAGE EAU26243 Storage Short-term Always store your motorcycle in a cool, dry place and, if necessary, protect it against dust with a porous cover. Be sure the engine and the exhaust system are cool before covering the motorcycle. ECA10810 NOTICE ● ● 8 Storing the motorcycle in a poorly ventilated room or covering it with a tarp, while it is still wet, will allow water and humidity to seep in and cause rust.
U2S312E0.book Page 5 Thursday, June 3, 2010 9:43 AM MOTORCYCLE CARE AND STORAGE TIP Make any necessary repairs before storing the motorcycle.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM SPECIFICATIONS Dimensions: Overall length: 2395 mm (94.3 in) Overall width: 820 mm (32.3 in) Overall height: 1190 mm (46.9 in) Seat height: 775 mm (30.5 in) Wheelbase: 1700 mm (66.9 in) Ground clearance: 140 mm (5.51 in) Minimum turning radius: 3500 mm (137.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM SPECIFICATIONS Primary reduction ratio: 86/57 (1.509) Secondary reduction system: Shaft drive Secondary reduction ratio: 22/23 × 29/09 (3.082) Transmission type: Constant mesh 5-speed Operation: Left foot operation Gear ratio: 1st: 38/16 (2.375) 2nd: 38/21 (1.810) 3rd: 35/25 (1.400) 4th: 29/26 (1.115) 5th: 29/31 (0.935) Chassis: Frame type: Diamond Caster angle: 31.00 ° Trail: 148.0 mm (5.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM SPECIFICATIONS Rear suspension: Type: Swingarm (link suspension) Spring/shock absorber type: Coil spring/gas-oil damper Wheel travel: 110.0 mm (4.33 in) Electrical system: Ignition system: TCI Charging system: AC magneto Battery: Model: YTZ14S Voltage, capacity: 12 V, 11.2 Ah Headlight: Bulb type: Halogen bulb Bulb voltage, wattage × quantity: 9 Headlight: 12 V, 60 W/55 W × 1 Tail/brake light: LED Front turn signal/position light: 12 V, 21 W/5.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION EAU26352 Identification numbers Record the key identification number, vehicle identification number and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. KEY IDENTIFICATION NUMBER: VEHICLE IDENTIFICATION NUMBER: EAU26381 Key identification number EAU26400 Vehicle identification number 1 1 1.
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION EAU26470 Model label EAU48270 Vehicle Emission Control Information label 1 1 1. Model label The model label is affixed to the frame under the rider seat. (See page 4-22.) Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer. 1.
U2S312E0.book Page 3 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION EAU26551 Reporting safety defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A.
U2S312E0.
U2S312E0.book Page 5 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION EAU26632 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your vehicle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required. It is not acceptable proof of maintenance work.
U2S312E0.
U2S312E0.book Page 7 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION EAU26663 YAMAHA MOTOR CORPORATION, U.S.A. STREET AND ENDURO MOTORCYCLE LIMITED WARRANTY Yamaha Motor Corporation, U.S.A. hereby warrants that new Yamaha motorcycles will be free from defects in material and workmanship for the period of time stated herein, subject to certain stated limitations.
U2S312E0.book Page 8 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION WARRANTY QUESTIONS AND ANSWERS CUSTOMER SERVICE Q. What costs are my responsibility during the warranty period? A. The customer’s responsibility includes all costs of normal maintenance services, non-warranty repairs, accident and collision damages, and oil, oil filters, air filters, spark plugs, and brake shoes.
U2S312E0.book Page 9 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION EAU26750 YAMAHA EXTENDED SERVICE (Y.E.S.) Keep your Yamaha protected even after your warranty expires with genuine Yamaha Extended Service (Y.E.S.). In addition, Travel and Recreation Interruption Protection (TRIP) is included at no extra cost.
U2S312E0.book Page 10 Thursday, June 3, 2010 9:43 AM CONSUMER INFORMATION We urge you to act now. You’ll get the excellent benefits of TRIP coverage right away, and you’ll rest easy knowing you’ll have strong factory-backed protection even after your Yamaha Limited Warranty expires. A special note: If visiting your dealer isn’t convenient, contact Yamaha with your Primary ID number (your frame number). We’ll be happy to help you get the Y.E.S. coverage you need. Yamaha Service Marketing P.O.
U2S312E0.book Page 1 Thursday, June 3, 2010 9:43 AM INDEX A ABS ...................................................... 4-17 ABS warning light ................................... 4-4 Air filter element.................................... 7-20 Auxiliary light bulb, replacing ................ 7-40 Engine trouble warning light ....................4-4 EXUP system ........................................4-27 F Battery .................................................. 7-32 Brake and clutch fluids, changing...
U2S312E0.book Page 2 Thursday, June 3, 2010 9:43 AM INDEX Tires ...................................................... 7-22 Tool kit .................................................... 7-2 Troubleshooting .................................... 7-41 Troubleshooting charts ......................... 7-42 Turn signal indicator lights ...................... 4-2 Turn signal light bulb, replacing ............ 7-38 Turn signal switch ................................. 4-15 V Valve clearance ........................
U2S312E0.
YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2010.06-0.
