Owner`s manual

ma I n t e n a n c e & ca r e
4
4-12
STEERING CABLE INSPECTION
Be Sure to Check:
1) Check for smooth operation of the
wheel and steering nozzles.
2) Check for proper steering adjust-
ment. The nozzles should both
point straight back when the steer-
ing wheel is centered.
If steering is stiff or misadjusted, ask
your Yamaha dealer to service it.
CONTROLS (THROTTLE / SHIFT)
Check the control levers for smooth
operation and proper shifting.
1) Remove the engine stop switch
cord (lanyard) and ignition keys.
2) Push and pull the control levers
through their full range, from
Neutral to wide-open throttle For-
ward and from Neutral to Reverse.
Operation should be smooth.
3) While a second person watches
from the stern, move the control
levers to the Forward position.
Check that the shift gates lift
completely to the stops.
4) While the second person watches,
move the levers back to the Reverse
position. Check that the shift gates
drop down over the nozzles to the
stops.
If the controls do not operate smoothly
or correctly, ask your authorized Yamaha
Boat dealer for service.