Owner`s manual

ManualsBrandsYamaha ManualsBoat242 Limited S

op e r a t I o n

3

3-26

5) Remove hull drain plug  and the

engine compartment drain plugs

. Rinse the engine compartment

with a small amount of fresh water.

Be careful not to get water on the

air filter area or electrical compo-

nents. Allow any water in the bilge

to drain out. After the water has

drained, wipe the engine compart-

ment and bilge with dry rags. Rein-

stall all drain plugs.

Tighten the hull drain plug 

securely before launching the boat.

Clean any foreign material, such as

dirt or sand, from the threads before

installing the drain plug.

6) Spray a rust inhibitor, such as

Yamaha Silicone Protectant and

Lubricant, on metallic parts to

minimize corrosion.



NOTICE:



X X X X

