User Manual

36 PSR-S950/S750 Reference Manual

Styles

2 DYNAMICS

This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics settings

are applied to each channel or all channels of the Section selected on the BASIC page.

2 Press the [D] (EXECUTE) button to actually enter the edits for each display.

The values which are shown in the STRENGTH, EXPAND/COMP. and BOOST/CUT parameters are

expressed as a percentage of the last set value.

After the operation is completed, this button changes to “UNDO,” letting you restore the original data if

you are not satisfied with the Groove or Dynamics results. The Undo function only has one level; only the

previous operation can be undone.

[1 ]/

[2 ]

CHANNEL Selects the desired channel (part) to which Dynamics is to be applied. The

selected channel is shown at the upper left of the display.

[3 ]/

[4 ]

ACCENT TYPE Determines the type of accent applied—in other words, which notes in the

part(s) are emphasized with the Dynamics settings.

[6 ] STRENGTH Determines how strongly the selected Accent Type (above) will be

applied. The higher the value, the stronger the effect.

[7 ] EXPAND/

COMP.

Expands or compresses the range of velocity values. Values higher than

100% expand the dynamic range, while values lower than 100% compress

it.

[8 ] BOOST/CUT Boosts or cuts all velocity values in the selected section/channel. Values

above 100% boost the overall velocity, while values below 100% reduce

it.