Service manual

ManualsBrandsYamaha ManualsElectronic Keyboard440

1980 SRX440

Shim

Slider button-to-

guide clearance

c. Install the

component

parts to

the

slid-

ing sheave and the sheave cap.

o

2.

when

installing

the

spacer and collar to

the

spider.

the

spacer and the spider

projections

must

be

fitted

to

the

collar

slit.

NOTE:

------------

1.

When

installing the spider and primary

sheave cap to the primary sliding

sheave, be sure to align

the

X marks on

the

spider and sheave cap

with

that

on

sliding sheave.

- X Freefrom oil

_ Greasing point

b. Oil the

points

shown

in

the

illustration.

Do

not

apply the grease on

the

portion

of

X mark. For

other

parts. greasing is

unnecessary.

CAUTION:---------...,

If the cotter pin. is

removed

for the

greasing. replace it

with

new

one.

CAUTION:---------...,

When the bushing is replaced

with

new

one. apply molybdnum disulfide grease

to bushing lightly. Except for this. Don't

grease.

5-6