User Manual

ManualsBrandsYamaha ManualsDigital Pianos with MobileClavinova CVP601 B - BLACK DIGITAL PIANO

CVP-601 Owner’s Manual

Starting Up

Other character-entry operations

 Deleting characters

Move the cursor to the character you wish to delete by using the [DATA ENTRY]

dial, and press the [7] (DELETE) button. To delete all characters on the line at

once, press and hold the [7] (DELETE) button.

 Entering special character marks (Japanese “< >” and “< >”)

Select a character to which a character mark is to be added and press the [6] button

before actual entry of the character.

 Entering marks or space

Press the [6] (SYMBOL) button to call up the mark list.

2 Use the [DATA ENTRY] dial to move the cursor to the desired mark or space,

then press the [8] (OK) button.

 Converting into Kanji (Japanese language)

When the entered “hiragana” characters are shown in reverse display (highlighted),

press the [1]/[ENTER] button one or several times to convert the characters into

the appropriate kanji. You can change the reversed area by using the [DATA ENTRY]

dial. To actually enter the change, press the [1]/[8] (OK) button.

To change the converted kanji back to “hiragana,” press the [7] (DELETE) button.

To clear the reversed area at once, press the [8] (CANCEL) button.

 Selecting custom icons for files (shown at left of file name)

Press the [1] (ICON) button to call up the ICON SELECT display.

2 Select the icon by using the [A] – [J] buttons, [3] – [5] buttons or [DATA

ENTRY] dial. The ICON display includes several pages. Press the TAB [L][R]

buttons to select different pages.

3 Press the [8] (OK) button to apply the selected icon.

While holding the C7 key (right-most key on the keyboard), turn the power on. This

restores the all settings (except Language settings, etc.) to the factory default.

You can also restore a specified setting to the factory default value, or save/load your

own reset settings. Call up the operation display: [FUNCTION]→ [J] UTILITY → TAB

[L][R] SYSTEM RESET. For details, refer to the Reference Manual on the website.

NOTE

In the case of characters which

are not accompanied by special

character marks (with the

exception of kanakan and half-

size katakana), you can call up

the mark list by pressing the [6]

button after selecting a character

(before actual entry of a

character).

NOTE

To cancel the operation, press the

[8] (CANCEL) button.

Restoring the Factory-programmed Settings

NOTE

If you want to initialize only the

Registration Memory setting

(page 83), turn the power on

while holding the B6 key.