User Manual

CVP-601 Owner’s Manual
32
1
Performing Piano Songs on the Clavinova
2 Play the keyboard.
Only the pedals (page 34) and metronome (page 35) are enabled; all other non-
piano functions are unavailable.
3 Press the [EXIT] button to exit from the Piano Room.
The panel settings return to the ones set just before you called up the Piano Room
display.
The Piano Room display lets you set various parameters such as Piano type and
environment (reverb type). The settings here are applied only when the Piano Room
display is shown.
1 Press the [PIANO ROOM] button to call up the Piano Room
display.
2 Make the desired setups.
Creating the Desired Setup in the Piano Room
[A] PIANO Calls up the popup window which lets you select the
desired Piano Voice by using the [A]/[B] buttons.
[F] ENVIRONMENT Calls up the popup window which lets you select the
desired environment by using the [F]/[G] buttons.
[H] LID POSITION Calls up the popup window which determines how
much the virtual piano lid is opened by using the
[H]/[I] buttons.
[8] DETAIL Calls up the popup window which lets you set
various parameters. When you have finished
making settings, press the [8](OK) button.
• TOUCH [1–2]
Determines how the sound responds to the
strength with which you play the keys. “Soft”
produces high volume with moderate playing
strength. “Medium” is the standard touch
response. “Hard” requires moderately strong
playing for high volume.
• TUNE [3–4]
Determines the pitch of this instrument in 1Hz
steps.