User Manual

CVP-601 Owner’s Manual
42
2
Voices – Playing the keyboard –
The TRANSPOSE [-]/[+] buttons transpose the overall pitch of the instrument (the
keyboard sound, Style playback, Song playback, and so on) in semitone steps. Press the
[+] and [-] buttons simultaneously to instantly reset the transpose value to 0.
With the center/left pedals, you can add articulation effects and characteristic
instrument performance sounds to your playing. When you select a SA Voice for the
RIGHT1 Voice, the function of center and left pedals are switched to control articulation
effects.
The applied articulation effect differs depending on the selected Voice. For details, refer
to the Information display called up by pressing the [7] (INFO) button on the Voice
Selection display.
Transposing the Pitch of the Keyboard
NOTE
The Transpose functions do not
affect the Drum Kit or SFX Kit
Voices.
NOTE
You can also change the
transpose settings in the MIXING
CONSOLE display: [MIXING
CONSOLE] → TAB [L][R] TUNE
→ [1] – [3] TRANSPOSE.
Tuning
By default, the Tuning of the entire instrument is set to 440.0 Hz, and the Scale Tuning is
set to equal temperament. You can change these settings from [FUNCTION] → [A]
MASTER TUNE/SCALE TUNE. You can also adjust the Tuning parameter for each part
(keyboard parts, Style parts and Song parts) on the TUNE page of the Mixing Console
display (page 86).
For details, refer to the Reference Manual on the website.
Hz (Hertz):
This unit of measurement refers to
the frequency of a sound and
represents the number of times a
sound wave vibrates in a second.
Adding Articulation Effects to Super
Articulation Voices
NOTE
Keeping with the realistic
response of the original
instruments, the effects applied
vary depending on the range you
are playing in.
NOTE
When you select SA Voices for
two or more keyboard parts,
pressing a pedal simultaneously
affects all parts on which SA
Voices are selected.
NOTE
Pedal functions are automatically
changed depending on the
selected Voice. However, if you
need to, you can lock the pedal
function so that it does not
change automatically.
[FUNCTION] → [D]
CONTROLLER → [H] DEPENDS
ON R1 VOICE.