User Manual

CVP-601 Owner’s Manual
75
6
USB Audio – Playback and Recording Audio Files –
 Playing back a specified range of an audio file
During playback, press the [C] (A-B) button at the starting point (A) then press the
[C] (A-B) button again at the ending point (B) to start repeat playback between the A
and B points. To cancel this setting, press the [C] (A-B) button again.
 Adjusting the volume of audio playback
Press the [8] (AUDIO VOLUME) button then adjust the volume for audio files
by using the dial.
Try recording your performance as audio data to a USB flash memory.
• File format that can be recorded
.wav....... 44.1 kHz sample rate, 16 bit resolution, stereo
• Target sound for recording
All the sounds produced via your keyboard performance and input via the AUX IN
jack.
• Maximum amount of recording time
80 minutes per recording, though this may differ depending on the capacity of the
particular USB flash memory.
1 Connect the USB flash memory to the [USB TO DEVICE] terminal.
2 Set the desired Voice, etc. which you want to use for your
performance. (For information setting the Voice, see page 37; for
setting the Style, see page 48; for using the AUX IN jack, see page
90.)
NOTE
Specifying only Point A results in
repeat playback between Point A
and the end of the audio file.
Recording Your Performance as Audio
NOTE
To record your performance with
the USB Audio function, make
sure to use a compatible USB
flash memory. B
efore using a USB
flash memory, be sure to read
“Connecting a USB flash memory”
on
page 91.
NOTE
Songs protected by copyright,
such as preset Songs, and the
metronome sound cannot be
recorded.
NOTE
In addition to the Audio
Recording functions explained
here, MIDI Recording (page 65)
is also available on this
instrument.