User Manual

CVP-601 Owner’s Manual
83
8
Registration Memory – Saving and Recalling Custom Panel Setups –
Registration Memory
– Saving and Recalling Custom Panel Setups –
The Registration Memory function allows you to save (or
“register”) virtually all panel settings to a Registration
Memory button, and then instantly recall your custom panel
settings by simply pressing a single button. The registered
settings for eight Registration Memory buttons should be
saved as a single Bank (file).
1 Set up the panel controls (such as Voice, Style, effects, and so on) as
desired.
Refer to the separate Data List for a list of parameters that can be registered with
the Registration Memory function.
2 Press the [MEMORY] button in the REGISTRATION MEMORY
section.
The display for selecting the items to be registered appears.
3 Select the items you want to register.
Select the desired item by using the [2] – [7] buttons, then enter or
remove the checkmark by using the [8] (MARK ON)/ [8] (MARK OFF)
buttons.
To cancel the operation, press the [I] (CANCEL) button.
4 Press one of the REGISTRATION MEMORY [1] – [8] buttons to
which you wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button contains
data and its number is selected.
Registering Your Panel Setups
2
3
NOTICE
If you select the button whose
lamp is lit in red or green here,
the panel setup previously
memorized to the button will be
erased and replaced by the new
settings.