User Manual

CVP-601 Owner’s Manual

Registration Memory – Saving and Recalling Custom Panel Setups –

The saved Registration Memory Bank files can be recalled by using the REGIST BANK

[-]/[+] buttons or the following procedure.

1 Press the REGIST BANK [+] and [-] buttons simultaneously to call

up the REGISTRATION BANK Selection Display.

2 Press one of the [A] – [J] buttons to select a Bank.

You can also use the [DATA ENTRY] dial and the [ENTER] button to select a

Bank.

3 Press one of the green-lit numbered buttons ([1] – [8]) in the

Registration Memory section.

Recalling a Registered Panel Setup

NOTE

You can instantly call up the

information display of the

currently selected Registration

Memory Bank by pressing the

[DIRECT ACCESS] button and

one of the REGISTRATION

MEMORY [1] – [8] buttons in

sequence.

NOTE

When recalling the setups

including Song/Style/Audio file

selection from a USB flash

memory, make sure that the

appropriate USB flash memory

including the registered Song/

Style is connected to the [USB TO

DEVICE] terminal.

Advanced Features

Refer to the Reference Manual on the website, Chapter 8.

Deleting or renaming the

Registration:

Bank Selection display → [A] – [J] → [8]

(EDIT)

Confirming the Registration

Memory information:

Bank Selection display → [A] – [J] → [7]

(INFO)

Disabling recall of specific items: [FUNCTION] → [E] REGIST SEQUENCE/

FREEZE/ VOICE SET → TAB [L][R] FREEZE

Calling up Registration Memory

numbers in order:

[FUNCTION] → [E] REGIST SEQUENCE/

FREEZE/ VOICE SET → TAB [L][R]

REGISTRATION SEQUENCE