User Manual

CVP-601 Owner’s Manual
90
10
Connections – Using Your Instrument with Other Devices –
Playing External Audio Devices with the Built-in Speakers
You can connect the output jacks of an external device such as portable audio player to
the instrument’s AUX IN jack, letting you hear the sound of that device through the
built-in speakers of the instrument.
Optional footswitches (Yamaha FC4 or FC5) and an optional Foot controller (Yamaha
FC7) can be connected to the [AUX PEDAL] jack. A footswitch can be used for
switching functions on and off, while a foot controller controls continuous parameter
such as volume.
 Example 1: Controlling the volume of the performance data played on the
keyboard by the foot controller.
Connect the FC7 foot controller to the [AUX PEDAL] terminal. With the initial
factory settings, no special setup is necessary.
 Example 2: Controlling Song Start/Stop by footswitch
Connect a footswitch (FC4 or FC5) to the [AUX PEDAL] jack.
To assign the function to the connected pedal, select “SONG PLAY/PAUSE” in the
operation display: [FUNCTION] → [D] CONTROLLER → TAB [L][R] PEDAL.
NOTICE
To avoid the device damage,
first turn on the power to the
external device, then to the
instrument. When turning off
the power, first turn off the
power to the instrument, then to
the external device.
NOTE
The instrument’s [MASTER
VOLUME] setting affects the input
signal from the [AUX IN] jack.
Connecting a Footswitch/Foot Controller
Stereo mini plug
Audio cable
Audio player
Stereo mini plug
CVP-601
Headphone jack
Footswitch FC4
(optional)
Footswitch FC5
(optional)
Foot Controller FC7
(optional)
Foot Pedals
NOTE
Make sure to connect or
disconnect the pedal only when
the power is off.
Advanced Features
Refer to the Reference Manual on the website, Chapter 10.
Assigning specific functions to each
foot pedal:
[FUNCTION] → [D] CONTROLLER → TAB
[L][R] PEDAL