Service manual

RX-V363/HTR-6130

DVD/CD player

This unit

Digital audio pin cable

Optical cable

DVD/CD player

This unit

Fig. 1

■ UPDATING FIRMWARE

Example of connection between digital OPTICAL jacks

Example of connection between digital COAXIAL jacks

● Required Tools

• DVD or CD player (with DIGITAL OUTPUT (OPTI-

CAL or COAXIAL) jack)

• Optical cable (when OPTICAL jack is used)

• Digital audio pin cable (when COAXIAL jack is used)

• Firmware CD

* To make the firmware CD, download the latest

firmware from the specified download source to

PC.

● Operation Procedures

1. Connect this unit and DVD/CD player as shown be-

low. (Fig. 1)

After replacing the following parts, be sure to write the latest firmware.

• DSP P.C.B.

• IC201 (DSP P.C.B.)