Service manual

RX-V363/HTR-6130

Fig. 2

"STANDBY/ON" key

"SPEAKERS A/B/OFF" key

Writing is completed.Writing is started.

Fig. 3

FIRMWARE UPDATE mode

SPDIF Upgrade

Address:XXXXXX Upgrade OK

Please...

Turn off!!

XXXXXX: Address information of the received data

2. While simultaneously pressing the “STANDBY/ON” and “SPEAKERS A/B/OFF” keys of this unit, connect the power

cable of this unit to the AC outlet. (Fig. 2)

The FIRMWARE UPDATE mode is activated and “SPDIF Upgrade” is displayed. (Fig. 2)

3. Connect the power cable of DVD/CD player to the AC outlet.

4. Press the “STANDBY/ON” key of the DVD/CD player.

5. Press the “EJECT” key of the DVD/CD player to open the disc tray.

6. Place the firmware CD in the disc tray and close the disc tray.

7. Press the “PLAY” key of the DVD/CD player.

Then writing of the firmware is started. (Fig. 3)

8. When writing of the firmware is completed, “Upgrade OK”, “Please...” and “Turn off!!” are displayed repeatedly. (Fig. 3)