Service manual

RX-V665/HTR-6260

“STRAIGHT” key

● Operation Procedures

1. While pressing the “STRAIGHT” key of this unit, connect the power cable of this unit to the AC outlet. (Fig. 2)

The FIRMWARE UPDATE mode is activated and “CDDA Upgrader” is displayed. (Fig. 2)

2. Connect the power cable of DVD/CD player to the AC outlet.

3. Press the “STANDBY/ON” key of the DVD/CD player to turn on the power.

4. Press the “EJECT” key of the DVD/CD player to open the disc tray.

5. Put the firmware CD on the disc tray and close the disc tray.

6. Press the “PLAY” key of the DVD/CD player.

Then writing of the firmware is started. (Fig. 3)

7. When writing of the firmware is completed, “Update Success”, “Please...” and “Power off!!” are displayed repeatedly.

(Fig. 3)

Fig. 2

Fig. 3

CDDA Upgrader

XXXXXX XX XX Update Success

Please...

Power off!!

Writing is completed.Writing is started.

XXXXXX: Received data