User Manual

Table Of Contents

Parameter Settings

TENORI-ON Manual 24

Setting Parameters with the Function Buttons [L1] Instrument

[L1] Instrument

Selects the voice for the current layer.

When you press and hold the [L1] button vertical and horizontal lines will light on the matrix,

and the button at their intersection corresponds to the currently selected voice. If you press a

different LED button while these crossed lines are showing the intersection will move to that

button and the corresponding voice will be selected.

Refer to the Voice List on Page 119 for a complete list of voice numbers and names.

Voice numbers <01/16>, <02/16>, and <03/16> are user voices.

● When a user voice is selected from a preset voice, the Sound Length (➝ Page 52) will be set to 1000 (msec).

Conversely, when a preset voice is selected from a user voice the sound length for all other voices will be set

to 100 (msec).

● Changes will not be applied to notes that are already playing in the Push or Solo modes, or currently playing

notes if a long Sound length has been speciﬁed.

■ Range . . . . . . . . . . . . Vertical axis: 01 — 16. Horizontal axis: 01 — 16

■ Default . . . . . . . . . . . Different for each layer

[Reference]

❊ Layer menu/Instrument (➝ Page 49), Voice List (➝ Page 119)

The intersection of the crossed lines is the current voice number

(in this example: <06/10>).

Instrument ∞

Layer[01]

01/01:Photon

Voice Number Voice Name

Current Layer Number