User Manual
Table Of Contents
- The TENORI-ON Is …
- Layers and Performance Modes
- Layers and Blocks
- Voices
- Connecting to Second TENORI-ON or Computer
- Song Recording and Playback
- SD Memory Card File Types and Operations
- Non-performance Functions (Interior and Power Save Modes)
- Performance Modes
- Parameter Settings
- Setting Parameters with the Function Buttons
- Setting Parameters with the Jog Dial
- Appendix
- Display Message List
- Troubleshooting
- MIDI Data Format
- MIDI Implementation Chart
- Voice List
- Index
Parameter Settings
TENORI-ON Manual 29
Setting Parameters with the Function Buttons [L5] Loop Speed
[L5] Loop Speed
Sets the loop playback speed (the duration of the beats).
When the [L5] buttons is pressed the LED button column corresponding to the current
setting will light. Four settings are available, set via the leftmost four columns on the matrix:
quarter notes, eighth notes, sixteenth notes, and thirty-second notes.
While holding the [L5] button press a button in the corresponding column. LED buttons in
other columns have no effect.
● Not available in the Push Mode.
● This setting will be changed if the Master Loop Speed (all layers) parameter in the Play menu is changed.
■ Range . . . . . . . . . . . . 1 (quarter note), 2 (eighth note), 4 (sixteenth note), 8 (thirty-second note)
■ Default . . . . . . . . . . . 4 (The layer 14 default is 8)
[Reference]
❊
Play menu/Master Loop Speed (➝ Page 45), Layer menu/Loop Speed (➝ Page 51)
1
2
4
8
Loop Speed ∞
Layer[01]
4
Loop Speed
Current Layer Number