User Manual
Table Of Contents
- The TENORI-ON Is …
- Layers and Performance Modes
- Layers and Blocks
- Voices
- Connecting to Second TENORI-ON or Computer
- Song Recording and Playback
- SD Memory Card File Types and Operations
- Non-performance Functions (Interior and Power Save Modes)
- Performance Modes
- Parameter Settings
- Setting Parameters with the Function Buttons
- Setting Parameters with the Jog Dial
- Appendix
- Display Message List
- Troubleshooting
- MIDI Data Format
- MIDI Implementation Chart
- Voice List
- Index
Parameter Settings
TENORI-ON Manual 51
Setting Parameters with the Jog Dial ■ Layer Menu
3. Loop Speed
Sets the loop playback speed (the duration of the beats).
This display also appears when the [L5] button is pressed.
● This setting will be changed if the Master Loop Speed (all layers) parameter in the Play menu is changed.
■ Range . . . . . . . . . . . . 1 (quarter note), 2 (eighth note), 4 (sixteenth note), 8 (thirty-second note)
■ Default . . . . . . . . . . . 4 (The layer 14 default is 8)
■ LED Buttons . . . . . . . The leftmost four columns on the matrix correspond to the available settings: quarter notes,
eighth notes, sixteenth notes, and thirty-second notes.
Press an LED button in one of these columns to make the corresponding setting.
LED buttons in other columns have no effect.
[Reference]
❊
Play menu/Master Loop Speed (➝ Page 45), Function Button [L5] (➝ Page 29)
Loop Speed ∞
Layer[01]
4
Loop Speed
Current Layer Number
1
2
4
8
Settings are indicated by a lit column.