User Manual

Parameter Settings
TENORI-ON Manual 52
Setting Parameters with the Jog Dial ■ Layer Menu
4. Sound Length
Sets the note length (gate time).
This setting applies to all active notes in the current layer.
The LED buttons adjust the Sound Length in the increments listed below. You can also use
the jog dial for finer adjustment in +/-10 millisecond increments.
This display also appears when the [L2] button is pressed.
● Depending on the voice used, setting a shorter Sound Length may have no effect, or changing the Sound
Length may result in inconsistent sound. Also, the maximum length of user voices is 0.97 seconds, and
setting a longer Sound length will have no effect.
■ Range . . . . . . . . . . . . 10 msec — 9990 msec
■ Default . . . . . . . . . . . 100 msec (all layers)
■ LED Buttons . . . . . . . The selected values are displayed as illustrated below. Settings can also be made via the
LED buttons.
[Reference]
❊
Function Button [L2] (➝ Page 25)
Sound Length ∞
Layer[01]
100msec
Gate Time
Current Layer Number
10-50
60-100
110-200 210-300 310-400 410-500 510-600 610-800
810-1000
1010-2000 2010-3000 3010-4000 4010-5000 5010-6000 6010-8000 8010-9990
50
100 200 300 400 500 600 800
1000 2000 3000 4000 5000 6000 8000 9990
Values selected via the LED buttons.
Matrix display related to settings made via the jog dial.