Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- File Formats, and Devices/Media Supported by the Unit
- Introduction
- Using the Unit
- Parts of the Unit
- Use MusicCast CONTROLLER to Connect to a Network
- Play from an Input Source
- Pair the Unit with MusicCast-Enabled Devices
- Useful Features
- Troubleshooting
- Specs
- Quick Manual
- Spotify
- Safety Brochure
- Warranty
7
Use MusicCast CONTROLLER to connect to a
network
1 Connect the unit to an electrical outlet.
Connect the power cord (supplied) to the power connector on the unit, and then
plug the power cord into an electrical outlet.
Note
When the power cord is plugged into an electrical outlet, touch-sensitive components on
the unit will be adjusted. This adjustment takes approximately five seconds. Do not operate
the unit while this adjustment is in progress to prevent the unit from malfunctioning.
2 Connect to a network.
Follow steps – at right to connect to a network.
The unit can be connected to a network using either a wired or a wireless
connection. A network cable (available separately) is required for a wired network
connection.
Note
• For a wired network connection, connect a standard shielded twisted pair (STP) network
cable (straight, category 5 or higher; sold separately) to the NETWORK jack on the rear
panel.
• For more information on Internet connections, refer to the documentation provided
with your network devices.
• Security software installed on your computer or network device settings (firewall, etc.)
may prevent the unit from accessing your computer or Internet radio stations. If this
occurs, modify security software or network device settings to permit access by the unit.
Download the MusicCast CONTROLLER app to your mobile device from
the App Store or Google Play.
Use the app to configure network settings.
Follow the app’s on-screen instructions to complete network settings.
1
2
1 3
1
2
1 2
3
CONNECT
1 2
3
CONNECT
The z indicator glows steadily
when the unit is on.
3