Guide

12
CobraNet Discovery Quick Guide (For CobraNet Compatible product from Yamaha)
3 Enter an appropriate bundle number in the “Bundle” field.
NOTE Enter a number that is not already used as a transmit bundle number anywhere else on the network.
4 Select the bit depth to be used for audio transfer from the “SubFormat” pull-down menu.
Check the [All Same] checkbox to set all channels in the bundle, and all bundles for the device, to the same value. Bit
depth only needs to be set for the transmitting device. No bit depth setting is required for the receiving device.
When latency is set to 5.33 msecs and bit depth is set to 24 bits, the maximum number of channels that can be
transmitted per bundle is limited to seven. In such cases set the SubCount field to “7”. Refer to the MY16-CII or
DME8i-C/DME8o-C/DME4io-C owner’s manual for details on the relationship between bit depth and the number of
channels that can be handled per bundle.
5 Click [Apply] and then [OK].