Guide

16
CobraNet Discovery Quick Guide (For CobraNet Compatible product from Yamaha)
6. Other Settings
6.1. Conductor Priority Settings
Conductor priority determines which network node functions as the conductor. Refer to the MY16-CII
owner’s manual for information on CobraNet conductors and performers.
It is normally not necessary to set conductor priority manually. Refer to the CobraNet Manager Lite for
Yamaha owner’s manual for information on conditions that make manual setup necessary.
1 In the Discovery window, select [Preference] in the [Tools] menu.
2 Check the [Enable SNMP] checkbox.
3 Click [OK].
4 Select the target device in the Discovery window, and select [Configure] from the [Tools]
menu.
5 Click the [SNMP] button.
The [Generic SNMP R/W] dialog box will appear.
6
Enter the following values in each field.
 Type：Integer
 OID：1.3.6.1.4.1.2680.1.3.3.3.1.2.2
 Enter “0” (Zero) for Auto, otherwise enter a value between 0x80000000 and 0x800000ff.