Owner`s manual

3-22
E
UP
DN
701034
UP
DN
403011*
304034*
411014
EMU00294
PROCEDURE FOR TILTING UP
Power trim/tilt model
1) Remove the fuel-line connection from
the motor.(If the fuel connector is pro-
vided on the motor.)
2) Push the power trim/tilt switch “UP”
until the outboard has tilted up com-
pletely.
4) Once the engine is supported with the
tilt-support lever, push the power
trim/tilt switch DOWN to retract the
trim rods.
cC
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growths and corrosion
which could damage the power trim/tilt
mechanism.
3) Turn the tilt-support lever toward you
and support the engine.
w
After tilting the engine, be sure to sup-
port it with the tilt-support lever. Other-
wise, the engine could fall back down
suddenly if oil in the power trim/tilt unit
should lose pressure.
688-9-S9-3 5/24/00 3:55 PM Page 23