Owner`s manual

4-16
E
5) Attach the filter assembly to the
bracket with that the fuel hoses are
attached to the filter assembly.
6) Run the engine and check the filter
and lines for leaks.
1 Filter element
2 O-ring
3 Filter cap
4 Filter housing
207026*
w
e
q
t
r
115
EMK50210*
Cleaning the fuel filter
115
1) Slightly loosen the filter cup ring nut.
2) Remove the filter cup, catching any
spilled fuel in a rag.
3) Remove the filter element, and wash
it in solvent.
Allow it to dry. Inspect the filter ele-
ment and O-ring to make sure they
are in good condition. Replace them if
necessary.
4) Reinstall the filter element in the cup.
Make sure the O-ring in position in the
cup. Insert the cup and O-ring into the
filter housing. Firmly screw the ring
nut onto the filter housing.
5) Run the engine and check the filter
and lines for leaks.
1 Filter element
2 O-ring
3 Filter cap
4 Ring nut
5 Filter housing
NOTE:
If any water is in the fuel, the red ring in
the fuel filter unit will float. If so, remove
the cup and drain the water.
207013
q
w
e
60/75/85
207025
115
688-9-S9-4 5/24/00 3:51 PM Page 17