Service manual

9
Soavo-900SW
Soavo-900SW
2. スピーカーユニットの外し方
a. q のネジ８本を外し、スピーカーユニットを取り外し
ます。(Fig. 1)
 
b. スピーカーユニットの端子からコネクターを外します。
(Fig. 1)
3. リアパネル ASS'Y の外し方
a. w のネジ 12 本を外し、リアパネルASS'Y を取り外しま
す。(Fig. 2)
  
 

b. CB4, CB5, CB15-17, CB20, CB22 を外します。(Fig. 3)
2. Removal of Driver
a. Remove 8 screws (
q) and then remove the driver.
(Fig. 1)
* Use an allen wrench (4mm) to unscrew the driver.
b. Disconnect the connector connected to the terminal of
the driver. (Fig. 1)
3. Remove of Rear Panel Ass’y
a. Remove 12 screws (
w) and then remove the rea
panel ass’y. (Fig. 2)
* Arrow marks ( ) are printed to identify the screws to
be removed.
* When assembling the rear panel ass’y, check to ensure
that packing is not damaged so as to prevent air leakage
from occurring.
b. Remove CB4, CB5, CB15 (U, C, T, K, A, B, G
models), CB16-17, CB20 and CB22. (Fig. 3)
c. Remove CB13 and CB14. (R, L models) (Fig. 3)
Fig. 2
Fig. 3
w
Rear Panel Ass'y

CB20
CB5
CB16
CB17
CB15
CB14 CB13
CB4 CB22
MAIN (2)MAIN (1)
DIGITAL
MAIN (5) MAIN (6) MAIN (7)
(R, L models)
(U, C, T, K, A. B, G, J models)