Owner's Manual

20
Connections
Trigger connection
You can connect a Yamaha AV receiver or other
component that supports the Trigger function. You can
control this unit in sync with a connected component.
When the power to the connected component is turned on,
the power to this unit is also turned on. Simultaneously,
the input source to the unit is set to MAIN DIRECT.
If MAIN DIRECT has been selected as the input source
for this unit, when the power to the connected component
is turned off, this unit will enter standby mode.
When the power switch on this unit is turned Off, the power to
the unit will not be triggered.
Remote connection
■ Operating the unit from another room
If you connect a commercially-available infrared receiver
and transmitter to the unit’s REMOTE IN/OUT jacks, you
will be able to operate the unit and/or external component
from another room, using the supplied remote control.
Note
TRIGGER
OUT
PRE OUT
TRIGGER
IN
MAIN IN
Rear panel of this unit
Yamaha AV receiver or
other component that features
TRIGGER OUT jacks and PRE OUT jacks
Monaural
mini-plug cable
Stereo pin cable
Rear panel of this unit
Infrared receiver
Infrared
transmitter
Remote control External component
(CD player, etc.)