Owner's Manual

198
Chapter 5 EDIT Mode
EG Function
EG - PEGRate (Pitch-EG Rates)
Sets the rates for the pitch EG.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select PEGRate.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔ - ✔✔✔
Push action ✔ ----
Use this page together with the PEGLevel page (☞200) to set up the sample’s PEG (pitch
envelope generator). The PEG determines how the pitch varies over time as each note
plays out.
Note On
Pitch (high)
Pitch (low)
Initial Level
Attack Rate Decay Rate Release Rate
Time
Attack Level
Release Level
Sustain Level
Basic Pitch
Note Off
Use the PEGRate page (this page) to set the rates (attack, decay, and release rates). Use
the PEGLevel page to set the levels (initial, attack, sustain, and release levels).
Knob 1 Change Page Select P/S
• Turn the knob to change to a different page within the EG function. Available pages
are: AEG, AEGMode, FEGRate, FEGLevel, FEGMode, PEGRate (this page), PEGLevel,
and PEGMode.
• Push the knob to move to the Program/Sample Selection screen. (☞95)