Owner's Manual

310
Chapter 8 UTILITY Mode
MIDI Function
MIDI - Bulk (Bulk Dump)
Sets parameters for MIDI bulk dumps.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select Bulk.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔ --
Push action ✔ ----
This page sets parameters related to MIDI bulk dumps.
Knob 1 Change Page Select P/S
• Turn the knob to change to a different page within the MIDI function. Available pages
are: Receive, Adjust, RcvFlt, and Bulk (this page).
• Push the knob to move to the Program/Sample Selection screen. (☞95)
Knob 2 Protect = off, on
This setting selects whether the A3000 accepts bulk-dump transmissions from con-
nected MIDI devices. If you set the protection off, the A3000 will accept and process
dumped data as soon as it is received. If you set the protection on, the A3000 ignores all
received bulk data.
Knob 3 Device# = off, 1,...,16, all
This value sets the A3000’s device number for purposes of bulk dumps.
The A3000 can transfer a bulk dump to/from another device only if the two devices have
consistent device-number settings.
off The A3000 does not send or receive bulk dumps.
1,...,16 The A3000 can receive bulk dumps directed to this device number
only. It transmits all bulk dumps to this device number,
all The A3000 accepts all bulk dumps, regardless of device number.
It transmits bulk dumps to Device #1 only.