Owner's Manual

Troubleshooting

349

Appendix

Pitch is incorrect

• Has the pitch bend wheel of an external MIDI device been moved?

When there is a problem with the program settings

• Is Transpose set to a value other than 0? (☞128)

• If you are using a sample for which portamento is turned on, is the portamento Rate

set extremely low (or is the Time extremely high)? (☞130)

When there is a problem with the sample settings

• Is OrigKey set correctly? (☞170)

• Are Coarse and Fine set correctly? (☞178)

• Is Fixed turned ON? (☞178)

• Is Random set to a setting other than 0? (☞178)

• Is the PEG set? (☞198)

• If an external controller has been set to control the Pitch Bias of a sample, is that

controller raised (or lowered) ? (☞210)

When there is a problem with the utility settings

• Are the master tuning parameters Coarse and Fine set correctly? (☞298)

• Is the MIDI parameter Transpose set to other than 0? (☞307)

Cannot record

• If you are recording an analog signal, is the REC VOL knob turned up? (☞8)

• Is there free memory? To create contiguous free space, execute the Optimize opera-

tion. (☞223)

• Is the Input selected correctly? (☞227)

Cannot save data

• Is the write protect tab of the floppy disk in the Protect position?

• Is the floppy disk or hard disk formatted correctly? (☞252—258)

• Is the hard disk mounted correctly? (☞270)

• If you are using a hard disk, is a volume selected? (☞266)