Owner's Manual

Starting Out
43
Chapter 2 Trying It Out
Chapter 2
Deleting and Redoing
If the recording results are not satisfactory, please use the following procedure to delete
the recorded sample. Then record the sample again as described in the previous section.
Procedure
1.
Select PLAY mode, and then select the SAMPLE function (second function
button).
▼The screen looks like this.
2.
Press the COMMAND key.
Memo
The COMMAND key calls up a command screen that you use to execute a specific command. The
command that appears depends on the current mode and function.
3.
Turn Knob 1 to select the >DELETE page.
4.
Be sure that Type (Knob 2) is set to Smp.
If necessary, turn Knob 2 to change the setting to Smp.
5.
Turn Knob 4 to select the name of the sample to be deleted.
In this case, you want to set the value to _NewSample.
PLAY
EDIT
REC
DISK
UTILITY
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI