Owner's Manual

ManualsBrandsYamaha ManualsMarine Sanitation SystemA3000

Sample Editing

Chapter 2 Trying It Out

Using a Filter

We will now set up a filter for the eeeee sample. The filter settings should produce a

significant change in the sample’s sound.

Procedure

Select EDIT mode, and then select the FILTER function.

Press Knob 1, and then turn Knob 2 or Knob 3 to select the Voice EE sample

for editing. Then press Knob 1 again.

Turn Knob 1 to select the Filter screen. Then turn Knob 2 to set Type to HiPass1.

Turn Knob 3 to set Cutoff to 100.

▼The screen should now look like this.

Now play a key between C3 and B3 at your keyboard.

▼Notice how the filter has eliminated the low-frequency components of the eeeee sound.

Memo

The A3000 offers a variety of filter types. You can select from among two high-pass filters (HiPass1,

HiPass2), two low-pass filters (LowPass1, LowPass2), a band-pass filter (BandPass), and a band-

eliminate filter (BandElim).

PLAY

EDIT

REC

DISK

UTILITY

PROGRAM

TRIM / LOOP

RECORD

PROGRAM

TOTAL EQ

SAMPLE

MAP / OUT

SETUP

SAMPLE

PANEL PLAY

EASY EDIT

FILTER

METER

SEQUENCE

EFFECT

VOLUME

MASTER

SETUP

LFO

EXT CTRL

DISK

SYSTEM

CONTROL

MIDI / CTRL

MONITOR

IMPORT

MIDI