Owner's Manual

ProgramEditing
57
Chapter 2 Trying It Out
Chapter 2
Program Editing
This section introduces you to some basic program-editing procedures.
Using Effects
We will first set up an effect for the currently selected program (Pgm 001). In particular,
we will apply a “flanging pan” effect to the eeeee sample.
Procedure
1.
Select EDIT mode, and then select the MAP/OUT function.
2.
Press Knob 1, and then turn Knob 2 or Knob 3 to select the Voice EE sample
for editing. Then press Knob 1 again.
3.
Turn Knob 1 to select the Output page. Then turn Knob 2 to set MainOut to
Effect1.
▼The screen should now look like this.
Memo
The A3000 allows you to assign up to three effects (Effect1, Effect2, and Effect3) to each program.
You can then apply any one of these effects to each of the samples used by the program. The MainOut
setting determines which of the effects is applied to the sample. In this case, we will apply Effect1.
PLAY
EDIT
REC
DISK
UTILITY
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI