Owner`s manual

Changes in PLAY MODE

Chapter 2

Chapter 2 Upgrade Reference

PLAY - COMMAND Key - ARNG_SB [Arrange Sample Bank]

This is a new command. The command can be accessed from the PLAY mode’s SAMPLE

function.

Use this command to automatically arrange (remap) the samples within the selected

sample bank. The command maps the samples to successive keys up the keyboard, one

sample per key. The samples are arranged in order of their Low key-range setting.

• Push Knob 1 to execute the command.

• Knob 2 selects the MIDI Receive Channel. The command will only arrange the sam-

ples that are set to operate on the selected channel. If you set the value to all, the

command will arrange all samples within the bank (with the exception of those elimi-

nated by the Knob-3 setting.)

• Knob 3 selects the range of samples to be targeted for arrangement. Note that you

can only select the low note for the range; the high note is fixed at G8. The A3000 will

remap only those samples whose key range falls entirely within the range you set

here. In other words, the A3000 will not remap any sample whose Low setting is

below the note value that you set here.

• Knob 4 selects the starting note for the new arrangement. The A3000 will map the

first sample (the sample with the lowest Low setting) to this note, the next sample to

the next higher note, and so on up the keyboard.

• Knob 5 selects whether samples are mapped to all keys (all) or to white keys only

(white).