Operation Manual

PLAY-SETUP
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Chapter 4 PLAY Mode 107
5. SETUP
This mode includes functions such as LFP S/H (Sample &
Hold) speed and A/D input setup.
Press the [PLAY] button and then the [F5] button to enter the
SETUP mode.
2 display pages are provided: S/Hspeed and ADInput.
• See "Basic Operation" on page 78 for details on acessing the vari-
ous display pages.
• When the program mode is set to "Multi" (page 89), the master pro-
gram setup settings take priority (the master program is the pro-
gram selected for the part assigned to the basic channel). If a setup
function is accessed when any other part is selected "Not a Master
Part" will appear on the display. If this happens select an appropri-
ate part via the PLAY-PROGRAM-PgmSel page (page 89), and
then use the setup functions.
S/H Speed
[PLAY] Button → [F5] Button → Knob 1 to select
"PLAY-S/Hspeed"
Set the sample & hold speed for the LFO (low-frequency
oscillator).
Knob 1
[ Turn] Page
Selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 3
[ Turn] S/HSpeed (Sample & Hold Speed)
Turn the knob to set the sample & hold speed for the LFO
(low-frequency oscillator).
This setting determines how the LFO operates on sam-
ples whose LFO Wave parameter is set to S/H. Specifi-
cally, the setting determines the "sample and hold" rate
used for random LFO modulation (page 143).
• Note that the term "sample" in "sample & hold" refers
to sampling rate, and is unrelated to A5000/A4000
sound samples.
[ Press] QUICK...
Calls the quick entry menu (page 83).
AD Input
[PLAY] Button → [F5] Button → Knob 1 to select
"PLAY-ADInput"
The ADInput page includes AD input ON/Off, source, pan,
and other functions relating to operation of the A/D input.
• Depending on the AD Input Source setting the L and R A/D inputs
can be used as independent mono inputs.
Knob 1
[ Turn] Cursor/Page
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] AD Input on/off
Switch the A/D-input feature on or off.
[Range] off, on
Knob 3
[ Turn] AD Input Source
Selects the input for the acoustic signal.
[Range] L/R, L+R, 2Mono
• L/R ... Use input stereo signal; handle the signal as
stereo.
• L+R ... Use input stereo signal, but handle as mon-
aural (mix the incoming L-channel and R-
channel signals).
• 2Mono ... The received stereo input signal is pro-
cessed as two independent mono signals.
Knob 4
[ Turn] AD Input-L Pan (A/D Input Left Pan)
Specifies the output pan position of the signal received
via the "L" A/D input jack.
[Range] -63 — +63
Positive values set pan to the right; negative val-
ues set pan to the left.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Page — S/HSpeed — —
Press
action
Tree View — QUICK... — —
Cursor q
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page
AD Input
on/off
AD Input
Source
AD Input-L
Pan
AD Input-R
Pan
Press
action
Tree View — — QUICK... QUICK...
q
Cursor