Operation Manual

PLAY-CONTROL
110 Chapter 4 PLAY Mode • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
6. CONTROL
This function sets up the program's controller handling.
Press the PLAY button and then the [F6] button to enter the
CONTROL mode.
4 display pages are provided: PgmCtrlA (Program Control
A), PgmCtrlB (Program Control B), ChSetup (Channel Setup,
and PgmLFO (Program LFO).
• See "Basic Operation" on page 78 for details on acessing the vari-
ous display pages.
• When the program mode is set to "Multi" (page 89), the master pro-
gram control settings take priority (the master program is the pro-
gram selected for the part assigned to the basic channel). If a
control function is accessed when any other part is selected "Not a
Master Part" will appear on the display. If this happens select an
appropriate part via the PLAY-PROGRAM-PgmSel page (page 89),
and then use the control functions.
Program Controller A/B
[PLAY] Button → [F6] Button → Knob 1 to select
"PLAY-PgmCtrlA"/"PLAY-PgmCtrlB"
Program Controller A/B lets you specify and set up the con-
trollers to be used to play programs.
• The controller settings that you make here operate in response to
control-change messages received over the Basic Receive Chan-
nel.
CONTROLLER A
CONTROLLER B
Knob 1
[ Turn] Cursor/Page
Positions the cursor to select a controller, and selects dis-
play pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Device
Use this setting to select the external physical controller
that you want to set for operation with the A5000/A4000.
[Range] 000 — 120, AfterTouch, PitchBend, NoteNumber,
Velocity, ProgramLFO, KeyOnRandom
• 000 — 120 ... Specifies one of the standard MIDI
controllers.
• AfterTouch ... Program control via keyboard (or
controller) aftertouch.
• PitchBend ... Program control via pitch bend data.
• NoteNumber ... Program control via note-on mes-
sage note number data.
• Velocity ... Program control via note-on message
velocity data.
• ProgramLFO ... Control change data created by
the internal Program LFO is used for program
control.
• KeyOnRandom ... A random control value is gen-
erated each time a note-on message is
received.
• If a controller with a standard control assignment -
"001/Modwhel", for example - is selected, the con-
troller name will also be displayed.
• You should generally avoid controller numbers 000
and 032, however, as many MIDI devices use these
numbers for bank selection purposes.
[ Press] MIDI
Allows setting the Device parameter directly from an
external MIDI controller (page 82).
Knob 3
[ Turn] Program Control Function
Specifies the program function to be controlled from an
external MIDI controller or the Program LFO.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page Device
Program
Control
Function
Range Type
Press
action
Tree View MIDI LIST... QUICK... —
Chapter 4 PLAY
Mode